ChinaDroneRequest a quote →
AirMind MindRacer Gen.3 Redpoll circuit board with USB-C port and board connectorAirMind MindRacer Gen.3 Redpoll circuit board with USB-C port and board connector

MindRacer Gen.3 Redpoll

The airmind MindRacer Gen.3 Redpoll is a compact member of the MindRacer Gen.3 hardware series, combining an STM32H743VIT6 MCU with motion, compass and barometric sensors. Its 6 g hardware provides 14 PWM outputs, WEP2 I/O sockets and multiple communication interfaces, with separately purchased accessories for power distribution, signal breakout and firmware debugging.

AirMindDrone flight controller
Weight
6 g
Dimensions
35 mm × 35 mm × 9 mm

Get a free quote

Product overview

The airmind MindRacer Gen.3 Redpoll combines a 400MHz STM32H743VIT6 MCU with 2MB flash storage, an ICM20602 6-axis accelerometer and gyro, a QMC5883L compass and a DPS310 barometer. Its hardware includes a TJA1051TK/3 CAN bus transceiver, a tricolor system status LED, a TF card slot and a USB-C connector. Measuring 35 mm × 35 mm × 9 mm and weighing 6 g, Redpoll also incorporates a 6-pin Mini-debug port, a 12-pin isolated redundant IMU socket with a shared bus, and 98-pin WEP2 I/O sockets arranged as 48 + 50 pins.

Redpoll provides 14 PWM outputs across eight AUX and six FMU channels, alongside S.Bus input/output, ESC telemetry input, external SPI, CAN, ETH RMII, serial and I2C interfaces. It works with the MindRacer Gen.3 MRPDB V3 4-in-1 ESC and power distribution board. For devices without WEP2 sockets, the optional breakout board routes signals to standard JST-GH sockets and soldering pads. The MindProbe mini supports MindRacer firmware flashing and debugging. These recommended accessories are purchased separately.

Flight control & navigation

Specifications

MindRacer Gen.3 Redpoll specifications
SpecificationValue & conditions
Product identityAirmind MindRacer Gen.3 Redpoll
MCUSTM32H743VIT6 MCU; 400MHz; 2MB flash storage
IMU interfaceSPI4
Accelerometer and gyroscopeICM20602 6-axis accelerometer and gyro
CompassQMC5883L
BarometerDPS310
CAN bus transceiverTJA1051TK/3
Status indicatorSystem status tricolor LED
Card slotTF card slot
USB connectorUSB-C
Debug port6-pin Mini-debug port
Redundant IMU socket12-pin isolated redundant IMU socketShared-bus
WEP2 I/O sockets98-pin (48 + 50)
PWM outputs14 total: 8 AUX channels + 6 FMU channels
ADC6.6V × 1
PWM capture input1 channel
External SPI bus1
S.BusInput/output
ESC telemetry input1
CAN1
Ethernet interfaceETH RMII × 1
Serial interfaces1 full UART with flow control; 2 USART
I2C2
SKUMRG3R1C1
Weight6 g
Dimensions35 mm × 35 mm × 9 mm
ESC and power distribution boardWorks with MindRacer Gen.3 MRPDB V3 4-in-1 ESC & PDBRecommended part purchased separately.
I/O breakoutWEP2 breakout board routes WEP2 socket signals to standard JST-GH sockets and soldering pads for devices without a WEP2 socket.Optional WEP2 breakout board purchased separately.
Firmware flashing and debugging accessoryMindProbe mini can flash and debug MindRacer firmware.MindProbe mini purchased separately.

Related guides