ChinaDroneRequest a quote →

AIRINS Speedip V2+

AIRINS Speedip V2+ is a UAV water sampling system that lowers a container to a selected depth and retrieves physical samples for laboratory analysis. It integrates automated lowering and retrieval, millimetre-wave ranging, rope monitoring and controller integration. Dedicated DJI Matrice packages supply a main unit, integration kit and PMMA container; PFAS-ready packages add stainless-steel containers.

AIRINSPayloads & thermal cameras

Get a free quote

Product overview

AIRINS Speedip V2+ collects physical water samples at selected locations and depths, including remote shores and steep banks. It supports routine water sampling, environmental investigations, aquatic research and emergency monitoring, returning samples for laboratory analysis. Automatic operation controls container lowering and retrieval; semi-automatic and manual modes are available for selected field conditions. The system collects and retrieves samples but does not measure water-quality parameters or replace laboratory analysis. Operation in rain is not recommended.

The system combines a main unit weighing less than 750 g with range sensing, rope management, controller integration and containers. Millimetre-wave ranging and intelligent control calculate lowering distance, while a starlight-level downward-facing camera shows the operating area. Rope monitoring detects tangling, backwinding and bottom contact, with emergency rope release available. The installed rope measures 10 m; achievable sampling depth equals rope length minus UAV hover height above the surface. Mounting or removal is designed to take less than 20 sec. Automatic lid operation and single-handed container changes support field handling.

Dedicated DJI Matrice 400 and Matrice 350 / 300 configurations provide DJI Pilot 2 control and waypoint workflows. Each Standard package includes one corresponding main unit with integration kit and one PMMA container: 2 L for M400 or 1 L for M350 / M300. PFAS-ready packages add three stainless-steel containers validated through third-party leaching and adsorption testing, while remaining suitable for general sampling. The UAV is purchased separately. Remote support is included; on-site support is available separately. The Health Management System tracks cumulative winch operation, with factory maintenance recommended at the indicated service interval.

Mission payloads

Specifications

AIRINS Speedip V2+ specifications
SpecificationValue & conditions
Product type and functionAIRINS Speedip V2+ UAV water sampling system collects physical water samples at selected locations and depths.
Sampling applicationsRoutine water sampling, environmental investigation, aquatic and scientific research, and emergency water monitoring.
Operating modesAutomatic controlled lowering and retrieval, with semi-automatic and manual modes available.Semi-automatic and manual modes are available for selected field conditions.
System constructionIntegrated main unit, range sensing, rope management, controller integration and sampling containers.
Depth controlMillimetre-wave ranging and intelligent control calculate container lowering distance from the aircraft's position above the water.
Downward cameraStarlight-level downward-facing camera with a wide view of the operating area.
Rope protectionReal-time detection of tangling, backwinding and bottom contact; emergency rope release available.
Controller integrationSampling status and control through the pilot interface, including waypoint-based operations.Compatible DJI aircraft.
Container handlingAutomatic lid operation and single-handed container changes.
Main-unit weightLess than 750 g
Installed rope length10 m
Designed mounting or removal timeLess than 20 sec
Achievable sampling depthInstalled rope length minus UAV hover height above the surface.Determined by installed rope length and UAV hover height above the water surface.
Example maximum sampling depthTheoretical maximum depth of about nine metres.One-metre UAV hover height above the water surface.
Analytical limitationCollects and retrieves physical samples; does not measure water-quality parameters or replace laboratory analysis.
Weather limitationOperation in rain is not recommended.Rain.
M400 package contentsM400 main unit with corresponding integration kit ×1; 2 L PMMA container ×1.DJI Matrice 400 Standard package.
M350 / M300 package contentsM350 / M300 main unit with corresponding integration kit ×1; 1 L PMMA container ×1.DJI Matrice 350 / 300 Standard package.
DJI control workflowDJI Pilot 2 control and waypoint workflow.DJI Matrice 400 and DJI Matrice 350 / 300 native configurations.
Additional containers and suitabilityAdds three stainless-steel containers validated through third-party leaching and adsorption testing for PFAS-sensitive sampling; also suitable for general-purpose sampling.PFAS-ready package.
Minimum mounting space25 × 18 × 35 cmSelected non-DJI aircraft integrations require AIRINS confirmation of mounting space, payload and platform suitability.
Minimum payload2.2 kgSelected non-DJI aircraft integrations with the smaller container require AIRINS confirmation of mounting space, payload and platform suitability.
Interface and power inputUSB-C API; 24 V / 4 A power input.Selected non-DJI aircraft integrations require AIRINS confirmation of mounting space, payload and platform suitability.
Incompatible aircraftDJI Inspire, Mavic, Phantom, Matrice 30 and Matrice 4 series are not compatible.
Mounting limitationVTOL mounting is not recommended.VTOL mounting.
Aircraft supplyUAV purchased separately.
Health management and maintenanceHealth Management System tracks cumulative winch operation; factory maintenance is recommended when the system indicates the service interval.
SupportRemote support included; on-site support arranged separately.

Related guides