MAD PULSAR 8S H743 Flight Controller
By MAD ComponentsThe MAD PULSAR 8S H743 Flight Controller combines an STM32H743 + ICM42688P configuration with 8S voltage support and dual BEC outputs rated at 5V/3A and 12V/2.5A. It features a 30.5x30.5mm mounting pattern with 4mm holes, USB Type-C and a 14-pin plug-and-play FC port.
Explore product ↗industryMAD PULSAR BL-32 8S 100A 4IN1 ESC
By MAD ComponentsThe MAD PULSAR BL-32 8S 100A 4IN1 ESC integrates four motor controllers into a 32g board for FPV drone builds. It uses BLHeli_32 firmware and supports up to 8S LiPo batteries. Its 100A continuous rating depends on forced air cooling, limiting suitability for long-endurance installations without that airflow.
Explore product ↗industryMAD PULSAR BL-32 8S 80A 4IN1 ESC
By MAD ComponentsThe MAD PULSAR BL-32 8S 80A 4IN1 ESC is a BLHeli_32 electronic speed controller for racing and freestyle drone integration. Its four-in-one architecture carries 8S and 80A designations. Continuous-current operation requires forced air cooling that keeps the overall temperature below 90 degrees.
Explore product ↗industryMAD PULSAR BL-S 6S 60A 4IN1 ESC
By MAD ComponentsThe MAD PULSAR BL-S 6S 60A 4IN1 ESC is a four-in-one drone electronic speed controller using BLHeli_S, intended for budget-conscious builds and casual flying. Its continuous-current operation requires forced air cooling below 90 degrees, restricting integration into long-endurance aircraft without that cooling.
Explore product ↗industryMAD PULSAR BL-S 8S 100A 4IN1 ESC
By MAD ComponentsThe MAD PULSAR BL-S 8S 100A 4IN1 ESC is a four-in-one drone electronic speed controller using BLHeli_S. Continuous-current operation requires forced air cooling that keeps overall temperature below 90 degrees. Intended for budget-conscious builds and casual flying, it is unsuitable for long-endurance aircraft using low KV motors without forced air cooling.
Explore product ↗industryMAD PULSAR BL-S 8S 100A Single
By MAD ComponentsThe MAD PULSAR BL-S 8S 100A Single is a BLHeli_S electronic speed controller intended for budget-conscious drone builds and casual flying. Identified by SKU 0102DT0536, it uses BLHeliSuite for configuration; selecting the wrong configuration suite prevents ESC detection.
Explore product ↗industryMAD PULSAR BL-S 8S 70A 4IN1 ESC
By MAD ComponentsThe MAD PULSAR BL-S 8S 70A 4IN1 ESC is a BLHeli_S electronic speed controller for drone integration and casual flying. Its continuous-current operation requires forced air cooling below 90 degrees, limiting use in long-endurance aircraft without that cooling.
Explore product ↗industryMAD PULSAR BL-S 8S 80A 4IN1 ESC
By MAD ComponentsThe MAD PULSAR BL-S 8S 80A 4IN1 ESC is a four-in-one drone electronic speed controller for budget-conscious builds and casual flying. It uses BLHeli_S firmware and BLHeliSuite configuration software. Continuous-current operation requires forced air cooling to keep the overall temperature below 90 degrees.
Explore product ↗industryMAD PULSAR BL-S 8S 80A Single
By MAD ComponentsThe MAD PULSAR BL-S 8S 80A Single is an individual FPV electronic speed controller intended for budget-conscious drone builds and casual flying. It carries 8S and 80A designations, uses BLHeli_S firmware, and requires BLHeliSuite for configuration. Its product identifier is SKU 0102DT0535.
Explore product ↗industryMAD StarNav FPV Drone GPS and Beidou Module w/Compass
By MAD ComponentsThe MAD StarNav FPV Drone GPS and Beidou Module w/Compass is a navigation module for FPV drones, combining GPS, Beidou and a compass. Its six specification options are StarNav-M10 K12, K18, K25, K12+, K18+ and K25+.
Explore product ↗industryMAD XP10 V2 Drone Arm Set 90KV
By MAD ComponentsThe MAD XP10 V2 Drone Arm Set 90KV is a drone propulsion arm assembly with a 36 in propeller and selectable CW or CCW rotation. It supports 12S and 14S power configurations, weighs 1.59kg, and provides sustained thrust of 7-12kg per rotor with maximum thrust listed as 24kg.
Explore product ↗industryMAD XP10S V2 Drone Arm Set 70KV
By MAD ComponentsThe MAD XP10S V2 Drone Arm Set 70KV is a propulsion arm assembly with a 43 in propeller and CW or CCW rotation options. It supports 12S and 14S power configurations, weighs 1.83kg, and has sustained thrust of 11-14kg/rotor and maximum thrust of 29kg.
Explore product ↗