GEPRC EM4218 350KV Motor
By GEPRCThe GEPRC EM4218 350KV Motor is a propulsion component for 13–15 inch long-range FPV aircraft, specified for 33.6V 8S LiPo input and 60A–80A ESCs. It combines a steel shaft, N52H magnets and copper winding, with mounting hardware included but conflicting screw-length descriptions.
Explore product ↗industryGEPRC Fettec G4 Alpha Flight Controller
By GEPRCThe GEPRC Fettec G4 Alpha Flight Controller weighs 6.6g and features an STM32G473CEU6 MCU, llM 42602 IMU, FETTEC ALPHA firmware and FETTEC OSD. It offers Type-C USB, external buzzer and LED support, plus 9V and 5V BEC outputs rated at 2A, each with a 2.5A maximum.
Explore product ↗industryGEPRC Fettec G4 Alpha GF50A STACK
By GEPRCThe GEPRC Fettec G4 Alpha GF50A STACK is an FPV flight-control electronics package pairing a G4 Alpha controller with a GF50A four-in-one ESC. It provides SH1.0 connections, DJI digital and analog video integration, and 2~6S LiPo input support, with signal cables, power accessories and mounting hardware included.
Explore product ↗industryGEPRC G2523 2.5” Props Propeller
By GEPRCThe GEPRC G2523 2.5” Props Propeller is a polycarbonate propeller set for racing and freestyle flight. It has a 2.5 inch length, 2.3 inch pitch, T-style M2 hub and specified weight of 1.1g. The supplied configuration includes four clockwise and four counterclockwise propellers, with four color choices.
Explore product ↗industryGEPRC G3045 3” Props Propeller
By GEPRCThe GEPRC G3045 3” Props Propeller is a polycarbonate component for racing and freestyle quadcopters, supplied in a four-propeller package with Black and Green options. It combines a 3inch length, 2.7-gram weight and T-style M2 hub with an optimized airfoil designed to reduce flutter during large flight-attitude changes.
Explore product ↗industryGEP-12A-F4 Flight Controller 12A ESC
By GEPRCThe GEPRC GEP-12A-F4 Flight Controller 12A ESC is a compact flight-control and motor-control electronics assembly for micro indoor quadcopters. It combines an STM32F411 processor, BMI270/42688 inertial sensing and BetaFlight OSD with a BLheli_S ESC. The 5.6g board accepts 2–4S LiPo input and comes with a power cable and mounting hardware.
Explore product ↗industryGEP-20A-F4 AIO
By GEPRCThe GEPRC GEP-20A-F4 AIO is a compact flight-controller and brushless ESC assembly for toothpick drones. Its approximately 7.3g board supports 2–4S LiPo input, 20A continuous current and 30A peak current. Supplied as an electronics component package, it includes OSD, current monitoring and silicone mounting pieces.
Explore product ↗industryGEP-BLS50A-4IN1 ESC
By GEPRCThe GEPRC GEP-BLS50A-4IN1 ESC is a four-in-one electronic speed controller accepting 3-6S LiPo power, rated at 50A continuous and 55A for five seconds. It measures 42.9 × 39.7mm with a 30.5 × 30.5mm mounting pattern. Supplied accessories include a capacitor, flight controller adapter cable, XT60 power cable and silicone grommets.
Explore product ↗industryGEP-BLS60A-4IN1 ESC
By GEPRCThe GEPRC GEP-BLS60A-4IN1 ESC is a four-in-one electronic speed controller with 3-6S LiPo input, Dshot 150/300/600 support and current sensing. It is rated at 60A continuous and 65A for five seconds, and includes a capacitor, flight controller adapter cable, XT60 power cable and four silicone grommets.
Explore product ↗industryGEP-Camera Damping Balls
By GEPRCGEPRC GEP-Camera Damping Balls are lightweight silicone camera-gimbal mounts intended to reduce vibration and HD footage jello effects. Three hardness options come in model-specific packs of six or seven balls. Their compact dimensions define the mounting interface for integration into the listed camera systems.
Explore product ↗industryGEP-CB5 Frame Parts
By GEPRCGEPRC GEP-CB5 Frame Parts is a selectable component range for the GEP-CB5 Frame Crocodile5 Baby. It covers structural plates and arms, camera and antenna mounting hardware, pads, battery retention, wire protection and fasteners, rather than a complete flight platform.
Explore product ↗industryGEP-CL20 Frame Parts
By GEPRCGEPRC GEP-CL20 Frame Parts is a selectable component offering for the GEP-CL20 Frame CineLog20. It covers structural plates, propeller guards, foam bumpers, receiver and camera mounts, and assembly accessories. Procurement concerns individual frame-part choices rather than a complete flight platform.
Explore product ↗