DYS BE2814 long shaft brushless motor
By DYSThe DYS BE2814 long shaft is a brushless motor for multi-rotor UAVs.
Explore product ↗industryDYS BE2826 Brushless Motor
By DYSThe BE2826 is a multirotor brushless motor.
Explore product ↗industryDYS BE3608 brushless motor
By DYSThe DYS BE3608 is a multicopter brushless outrunner motor with 460KV and 630KV configurations. Both share an 83g weight, a 42 × 15mm motor envelope and a published 3–6S LiPo range. Variant-specific electrical ratings and battery/propeller load results support component selection.
Explore product ↗industryDYS BE4108 Multi-Rotor Brushless Motor
By DYSThe DYS BE4108 Multi-Rotor Brushless Motor is an outrunner propulsion component offered in 720KV, 580KV, 480KV and 380KV versions. Its 46 × 25mm body, 4.0mm shaft and 113g weight define the mechanical integration envelope. All versions specify 3–6S LiPo batteries, with winding-specific electrical limits and battery–propeller-dependent pull figures.
Explore product ↗industryDYS BE4114 brushless motor
By DYSThe DYS BE4114 is a 350KV brushless outrunner motor intended for multicopter propulsion. Its published specifications describe a compact motor component for 5–6S LiPo integration, with configuration-dependent load data. Procurement assessment should confirm mounting details, package contents and the table's voltage/battery pairings, while distinguishing load-point figures from maximum continuous ratings.
Explore product ↗industryDYS BE5208 brushless motor
By DYSThe DYS BE5208 is a 330 KV outrunner brushless motor intended for multicopter propulsion. Its published dimensions, shaft size and battery range support integration planning. Configuration-specific load data, including 3300 g pull with a 6S LiPo battery and 18 × 5.5 APC propeller, rather than complete-aircraft performance.
Explore product ↗industryDYS BE8108 brushless motor
By DYSThe DYS BE8108 is a multicopter brushless outrunner motor offered in 100KV and 135KV variants. Dimensions are Φ86.8 × 26.6mm, with an 8.0mm shaft and 240g weight for both variants. Procurement requires matching the selected winding to its electrical ratings and specified load conditions; accessory contents are not itemized.
Explore product ↗industryDYS BGM2208-70 gimbal brushless motor
By DYSThe DYS BGM2208-70 is a 40 g brushless smart gimbal motor with a 12N14P configuration and 70-turn winding. Its integration specifications cover motor size, shaft diameter and internal resistance, with torque stated as 230 g at 5 V and 0.45 A.
Explore product ↗industryDYS BGM2208-80 gimbal brushless motor
By DYSThe DYS BGM2208-80 is a DongYang gimbal brushless motor with a 12N14P architecture, an 80-turn winding and a hollow shaft. It weighs 40 g and has a specified internal resistance of 13.5 ohm. Its torque figure is 230 g at 5 V and 0.52 A.
Explore product ↗industryDYS BGM2606-90 gimbal brushless motor
By DYSThe DYS BGM2606-90 is a gimbal brushless motor component with a published 12N14P construction, 90 T winding and hollow shaft. Its page provides physical and electrical selection data, including torque under a stated voltage and current condition.
Explore product ↗industryDYS BGM2608-70T-8.5 gimbal brushless motor
By DYSThe DYS BGM2608-70T-8.5 is a gimbal brushless motor with a published 12N14P configuration, 70-turn winding and hollow shaft. Its specifications support initial mechanical and electrical screening, but dimensional units, mounting details and package contents require confirmation. The published torque figure is qualified by 5 V and 0.8 A.
Explore product ↗industryDYS BGM3608-70 gimbal brushless motor
By DYSThe DYS BGM3608-70 is a gimbal brushless motor with an 18-slot, 24-pole architecture and 70-turn winding. Its dimensions, weight and camera-range entry support component selection, subject to configuration confirmation. Motor hardware but leaves the supplied accessory configuration and torque measurement basis unspecified.
Explore product ↗