Explore drone components and find options for your aircraft.
The GEPRC G3045 3” Props Propeller is a polycarbonate component for racing and freestyle quadcopters, supplied in a four-propeller package with Black and Green options. It combines a 3inch length, 2.7-gram weight and T-style M2 hub with an optimized airfoil designed to reduce flutter during large flight-attitude changes.
The GEPRC GEP-12A-F4 Flight Controller 12A ESC is a compact flight-control and motor-control electronics assembly for micro indoor quadcopters. It combines an STM32F411 processor, BMI270/42688 inertial sensing and BetaFlight OSD with a BLheli_S ESC. The 5.6g board accepts 2–4S LiPo input and comes with a power cable and mounting hardware.
The GEPRC GEP-20A-F4 AIO is a compact flight-controller and brushless ESC assembly for toothpick drones. Its approximately 7.3g board supports 2–4S LiPo input, 20A continuous current and 30A peak current. Supplied as an electronics component package, it includes OSD, current monitoring and silicone mounting pieces.
The GEPRC GEP-BLS50A-4IN1 ESC is a four-in-one electronic speed controller accepting 3-6S LiPo power, rated at 50A continuous and 55A for five seconds. It measures 42.9 × 39.7mm with a 30.5 × 30.5mm mounting pattern. Supplied accessories include a capacitor, flight controller adapter cable, XT60 power cable and silicone grommets.
The GEPRC GEP-BLS60A-4IN1 ESC is a four-in-one electronic speed controller with 3-6S LiPo input, Dshot 150/300/600 support and current sensing. It is rated at 60A continuous and 65A for five seconds, and includes a capacitor, flight controller adapter cable, XT60 power cable and four silicone grommets.
GEPRC GEP-Camera Damping Balls are lightweight silicone camera-gimbal mounts intended to reduce vibration and HD footage jello effects. Three hardness options come in model-specific packs of six or seven balls. Their compact dimensions define the mounting interface for integration into the listed camera systems.
GEPRC GEP-CB5 Frame Parts is a selectable component range for the GEP-CB5 Frame Crocodile5 Baby. It covers structural plates and arms, camera and antenna mounting hardware, pads, battery retention, wire protection and fasteners, rather than a complete flight platform.
GEPRC GEP-CL20 Frame Parts is a selectable component offering for the GEP-CL20 Frame CineLog20. It covers structural plates, propeller guards, foam bumpers, receiver and camera mounts, and assembly accessories. Procurement concerns individual frame-part choices rather than a complete flight platform.
The GEPRC GEP-CL25 Frame is a guarded 2.5-inch quadcopter frame kit supporting Vista HD digital or analog image transmission. It combines a 109mm motor-to-motor layout with camera damping and mounting accessories. Supplied hardware includes structural plates, posts, fasteners, guards, camera mounts, antenna mounting parts, pads and battery straps.
The GEPRC GEP-CL25 V2 Frame is a 114mm FPV airframe for 2.5 inch propellers, weighing 70.9g±2. It combines 7075 aluminum columns, an injection-molded protective frame and TPU landing pads with camera vibration damping, optional O3 image transmission integration, and battery retention using cable ties and aluminum parts.
GEPRC GEP-CL30 Frame Parts is a selection of components for the GEP-CL30 Frame CineLog30. Choices cover structural parts, propeller guards, damping components, battery retention and camera, receiver and antenna mounts. The product is configured by selecting a part.
GEPRC GEP-CL30 V2 Frame Parts is a selectable component offering for the GEP-CL30 V2 Frame and Cinelog30 V2. It covers structural plates, a propeller guard, equipment mounts, wiring, installation hardware, CTL-BEC and a COB LED strap, with configuration dependent on the chosen part.
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry