Explore drone components and find options for your aircraft.
The FlashHobby FH-D9257 Tail Servo is a digital RC-aircraft actuator with plastic gears, a coreless motor and a nylon-plus-fiber case. It supports PWM control at 4.8–6.0 V and includes a specified connector lead. rotation direction is also ambiguous.
The Flash Hobby FH-D9257MG Tail Servo is a 4.8–6.0V digital servo for RC aircraft, with a coreless motor, plastic gears and a nylon-plus-fiber housing. It includes servo arms/discs and mounting screws, with a 250 ± 5mm connector lead. Bearing and current specifications contain conflicting ratings.
The Flash Hobby A1207 Brushless DC Motor is a compact propeller-drive component supplied with mounting screws. It weighs 10.3g including cables and offers five standard KV options plus custom KV. Configuration-specific recommendations cover 2 or 3 inch propellers, 10A~20A ESCs and 3S or 4S operation, with specified maximum pull ranging from 244g to 445g.
The Flash Hobby D2225 Fixed Wing Motor is a 32g three-phase brushless outrunner supplied with mounting screws for propulsion integration. Standard 2000KV, 1600KV and 1350KV versions have distinct power, pull and propeller specifications. All three use DC7.4~11.10V, with a suggested 10A~30A ESC and PWM control.
The FlashHobby H2830 Fixed Wing Motor is an external-rotor, three-phase brushless motor for model aircraft and other speed-regulating equipment. It uses ESC-based PWM control and has defined shaft and mounting dimensions. Three versions carry separate maximum pull and power specifications, with a working temperature range of -0°C to +80°C.
The FlashHobby H450 Helicopter Motor is a propulsion component offered in 1850KV and 3800KV configurations. It combines a 9N/6P architecture with a 3.5 mm shaft and male connector. Each configuration has distinct LiPo cell ranges, ESC recommendations and continuous electrical limits, with peak current and power ratings limited to two seconds.
The Flash Hobby H500 Helicopter Motor is a 1600KV helicopter propulsion motor with a 9N/6P configuration, 5.0mm shaft and 25 × 25mm mounting pattern. It specifies 3–6S lithium-polymer operation and an 80A ESC recommendation. Integration dimensions, cable-inclusive weight and two-second peak limits accompany differing electrical ratings.
The FlashHobby H550 Helicopter Motor is a helicopter propulsion component with 44.6x59.5mm dimensions, a 6mm shaft and an M3 mounting interface. It specifies a 5mm male connector and recommends a 120A ESC. Conflicting speed constants, battery ranges and construction specifications leave its exact configuration unresolved.
The FlashHobby H600 Helicopter Motor is a 550RPM/V propulsion component with a 12N/10P configuration, 6mm shaft and 30x25mm M3 mounting interface. It supports 3-12S LiPo batteries and a suggested 120A ESC. Continuous ratings are 60A and 3000W, with higher peak ratings limited to two seconds.
The FlashHobby H700 Helicopter Motor is a 530KV motor component with a 12N/10P configuration, a 6mm shaft and a 5mm male connector. It weighs 492g including cables and supports 3–12S LiPo configurations. Continuous ratings are 100A and 4500W, with higher peak ratings limited to two seconds.
The FlashHobby K1303 is a micro brushless DC motor for small drones and quadcopters. It is a propulsion component, not a flight platform or airframe kit. It weighs 8.2 g with cables, uses a 9N12P configuration and comes in 5000KV (14.8V, 4S) and 8000KV (11.1V, 3S) versions, with a suggested 2-inch propeller.
The K2004 is a brushless motor documented for FPV use.
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry