| Model and product type | STEAM H700V2 canopy-version helicopter |
|---|
| Flight applications | Competition-level 3D flying and recreational flying |
|---|
| Rotor geometry | Low main-rotor height, high centre of gravity and large control travel |
|---|
| Canopy construction | Custom ultra-thin fibreglass canopy with a streamlined wraparound fit and fluorescent colours for aerial visibility |
|---|
| Landing gear | Composite POM landing gear with a reinforced T-shaped structure, multiple mortise-and-tenon joints and mounting screws positioned away from carbon-fibre plate edges |
|---|
| Main rotor grip bearings | Flanged bearings arranged alongside double-row angular-contact bearings |
|---|
| Rotor fitting dimensions | 0–1 mm H7203 shims accommodate 12 mm and 14 mm rotor bladesWith embedded H7203 blade-grip shims. |
|---|
| Ball-link retaining rings | Ball links with stainless-steel anti-burst ringsStandard equipment. |
|---|
| Spindle damping | Precision injection-moulded spindle locating rings, double-layer polyurethane rings with hardness reaching 95°, and specially designed transverse rubber washers |
|---|
| Main rotor grip arms | Two main rotor grip arm versions provide different flight responses |
|---|
| Swashplate bearings | Double-row angular-contact bearings in the outer swashplate and a high-precision spherical bearing in the inner plate |
|---|
| Ball-stud threads | 3.0 mm |
|---|
| Extended ball studs and links | Extended ball studs with 5.8 mm ball diameter and matching custom 5.8 mm ball links |
|---|
| Fuselage connection | Upper and lower fuselage sections connected by metal mortise-and-tenon modules with bidirectional engagement and two-screw fastening |
|---|
| Main shaft | Nominal Ø15 mm main shaft, precision dimension Ø14.990 mm, with laser-marked scale |
|---|
| Main shaft bearing support | Integrated main shaft bearing housing with angular-contact bearings at the upper and lower positions |
|---|
| Gear options | 125T / 127T / 129T main gears and 12T / 13T / 14T motor pinions |
|---|
| Main gear construction | Precision CNC-hobbed helical main gear with a reinforced frame and mortise-and-tenon construction |
|---|
| One-way clutch | Metal centre hub with a wedge-type overrunning clutch; locking force four times that of a needle-type one-way bearingCompared with a needle-type one-way bearing. |
|---|
| Motor mounting | Dual-bearing motor mount positioned along the carbon-fibre plate edge, with a large motor-wire outlet |
|---|
| Additional motor shaft support | Integrated third-bearing motor support counters lateral force from the helical gearing |
|---|
| Battery tray | Integrated slide-rail battery tray with added strap positions and fewer holes; lower plate compatible with the V1 fuselage; lowered battery centre of gravity |
|---|
| Tail boom and control rod | 28 mm tail boom; tail servo control rod reinforced at both ends with stainless-steel anti-burst sleeves |
|---|
| Tail fin construction | CNC-machined 2 mm carbon-fibre plate with an internal composite; approximately 5% greater bending and compressive strength and 20% lower weight than pure carbon fibre |
|---|
| Tail gearbox | Integrated metal tail gearbox with concentric tail-shaft bearing seats, a dual-bearing anti-slip design and built-in antistatic functionality |
|---|
| Plate material and side-panel upgrade | Approximately 5% greater compressive strength and 20% lower weight than pure carbon fibre; fuselage side panels in this material are a separately purchased upgradeNew composite-containing plate material; standard on the battery tray and selected other locations. |
|---|
| Tail support assembly | 8 mm diameter carbon-fibre tube tail supports with a reinforced T-shaped structure and multiple mortise-and-tenon joints |
|---|
| Servo arms and swashplate guide | Sacrificial metal servo arms and a floating swashplate guideStandard equipment. |
|---|
| Main gear thickness | 15 mmStandard equipment. |
|---|
| Wiring protection | Protective provisions for all equipment wiring |
|---|