| Model | AK420KJ |
|---|
| Product type and design team | Steam-designed AK420 model helicopter |
|---|
| Canopy | Custom ultra-thin painted fiberglass canopy with a streamlined, close-fitting wraparound design |
|---|
| Landing gear | One-piece injection-molded, high-strength reinforced plastic landing gear with a low-profile streamlined shape, interlocking features and canopy retention points |
|---|
| Main rotor blade grips | Metal main blade grips with dual-hole grip arms for axial and radial locking |
|---|
| Ball mounting geometry | 23.5/24.5MM ball mounting positions provide a 1MM change in ball distance from the central rotor hub |
|---|
| Inner ball mounting position | The inner ball mounting hole can be usedWith 380MM main rotor blades. |
|---|
| Outer ball mounting position | The outer ball mounting hole can be usedWith 420MM main rotor blades. |
|---|
| Battery plate | Open carbon-fiber battery plate facilitates battery installation and reinforces the front frame |
|---|
| Battery release feature | The battery plate allows the battery to separate from the fuselage to reduce component damageDuring a strong impact. |
|---|
| Motor protection plate | Carbon-fiber motor protection plate widens the fuselage to accommodate larger 32-series motors |
|---|
| Motor mount | Precision five-axis CNC-machined 6061T6 aluminum alloy motor mount with motor wire exits in multiple directions |
|---|
| Main gear thickness | Up to 12mm |
|---|
| Main gear construction | Imported acetal material, fully CNC machined with precision CNC gear hobbing and an interlocking design that reinforces the main frame |
|---|
| Recommended lubricant | Steam rubber grease HOT00006 is recommended for improved wear resistanceWhen lubricating the main gear. |
|---|
| Main shaft locking force | The main gear hub uses a sprag bearing with 3 times the locking forceCompared with an ordinary needle-type one-way bearing. |
|---|
| Main gear hub support | Thickened aluminum hub ring with upper and lower flanged bearings |
|---|
| Tail drive main gear | Fully CNC-machined 6061T6 aluminum alloy with precision CNC gear hobbing |
|---|
| Electronics plate | High-modulus carbon-fiber plate supports the gyro, receiver and antenna mount while bracing the tail boom clamp |
|---|
| Tail servo mount | Boom-mounted tail servo arrangement avoids pushrod length adjustment; the mount resists boom slipping and allows belt tension adjustment |
|---|
| Tail boom diameter | 16MM |
|---|
| Tail gearbox | Robust metal gearbox structure supports the tail control system |
|---|
| Tail blade grips | One-piece CNC-machined 6061T6 aluminum alloy construction with a three-bearing design |
|---|
| Tail control L-arm | Injection-molded high-strength reinforced plastic with multiple interlocking reinforcement ribs |
|---|