ChinaDroneRequest a quote →
Weinuoer XT60E yellow two-pin bullet connector pairWeinuoer XT60E yellow two-pin bullet connector pair

Weinuoer XT60E

The Weinuoer XT60E is a two-pin bullet connector for lithium battery-to-controller connections in UAVs, remote-controlled aircraft and other electric equipment. Its construction combines welding, injection molding and assembly, with a 180° wire exit, yellow PA housing and gold-plated contacts. It is suitable for panel installation.

WeinuoerDrone battery

Get a free quote

Product overview

The Weinuoer XT60E bullet connector provides a line-to-line connection between lithium batteries and controllers for UAVs, remote-controlled aircraft and other electric equipment. Its two-pin construction combines welding, injection molding and assembly with a 180° wire exit and suitability for panel installation. The connector has a yellow PA outer housing and gold-plated contacts. Applications also include remote-controlled cars and ships, balancing vehicles, electric scooters, unicycles, electric vehicles and solar lamps. During unpacking, handle the terminals carefully to avoid deformation, bending or dislodgement.

The XT60E is rated at 35A MAX under the 10AWG△<85℃ condition, with voltage resistance of 600V DC. Operating temperature is -20℃~120℃, protection level is IP40, and the flame retardant rating is UL94 V-0. Mechanical life is 100 times, with a salt spray specification of 48h. Contact resistance is ≤0.8MΩ and insulation resistance is ≥2000MΩ. Do not exceed the rated current or voltage, use the connector while external forces are applied, or operate it in locations with high temperature and humidity.

Batteries & charging

Specifications

Weinuoer XT60E specifications
SpecificationValue & conditions
Product modelXT60E
Rated current35A MAX10AWG△<85℃
Voltage resistance600V DC
Contact resistance≤0.8MΩ
Mechanical life100 times
Salt spray48h
Insulation resistance≥2000MΩ
Flame retardant ratingUL94 V-0
Outer housingPA, yellow
Contact platingGold plating
Protection levelIP40
Operating temperature-20℃~120℃
Connector construction2-pin connector with a 180° wire exit, welded construction, injection molding and assembly; suitable for panel installation
Connection applicationLine-to-line connection between lithium batteries and controllers
ApplicationsUAVs, remote-controlled aircraft, cars and ships, balancing vehicles, electric scooters, unicycles, electric vehicles and solar lamps
Use restrictionsDo not exceed the rated current or voltage. Do not use when external forces are applied to the connector or in locations with high temperature and humidity.
Terminal handlingAvoid deforming, bending or dislodging terminals during unpacking.When opening the package.

Related guides