Product overview
The T-MOTOR P22*6.6 Prop-2PCS/PAIR supplies two polished UAV propellers for installation onto motors. Its integrated two-blade architecture uses carbon fiber and epoxy, with dimensions specified as 22*6.6 (558.8*167.6mm). The listed single-blade weight is 45±2g. This is a propulsion component pair rather than a complete aircraft or airframe kit. For integration, the principal specified operating figures are an optimum speed of 2800~4800 RPM/min and a thrust limitation of 11.5kg; installation requires medium-strength or stronger anaerobic screw-locking adhesive.
Operating ambient temperature is specified as -40℃~65℃. Storage has a separate tabulated limit of -10℃~50℃ at humidity below 85%, while the handling guidance recommends 0–40℃ and humidity below 80%. Propellers must remain within their limits, and inspection before flight is required, with replacement if a fault is found. Spinning propellers can cause serious injury. Storage guidance also calls for protection from hostile chemical environments, including water, sulfur dioxide, nitrogen dioxide, chlorine, organosilicon compounds, cyano groups and phenol.
Specifications
| Specification | Value & conditions |
|---|---|
| Model dimensions | 22*6.6 (558.8*167.6mm) |
| T-MOTOR series | 2blades-integrated |
| Weight | 45±2gSingle blade. |
| Material | CF+Epoxy |
| Thrust limitation | 11.5kg |
| Ambient temperature | -40℃~65℃ |
| Optimum rotational speed | 2800~4800 RPM/min |
| Storage temperature and humidity | -10℃~50℃/less than 85%Storage. |
| Surface treatment | Polished |
| Supplied configuration | Two propellers per pair. |
| Recommended storage temperature and humidity | 0–40℃ at less than 80% humidity.Recommended storage environment. |
| Thread-locking requirement | Apply medium-strength or stronger anaerobic screw-locking adhesive.Installing propellers onto motors. |
| Inspection and replacement | Inspect propellers before flight and replace any found faulty.Before flight. |
Request a quote for P22*6.6 Prop-2PCS/PAIR
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
