T-Motor NS30*10

The T-Motor NS30*10 is a carbon-fiber UAV propeller supplied as a two-propeller pair. Built from carbon fiber and resin, it combines a 30-inch diameter with a 10-inch pitch. Its lightweight, low-inertia design supports efficient operation and longer flight time, with typical thrust of 6~10.5kg at 2580~3350RPM.

T-MOTORDrone motor

Material: Carbon fiber + resin

Product overview

The T-Motor NS30*10 carbon-fiber UAV propeller combines carbon fiber and resin in a lightweight design with low rotational inertia and strong scratch resistance. Supplied as a pair of two propellers, it has a 30-inch (762.5mm) diameter and a 10-inch (254mm) pitch. Reference weight is 72g per propeller. The package measures 796*111*84mm and weighs 783.2g. Its efficient design supports longer flight time.

Typical thrust is 6~10.5kg at 2580~3350RPM, with a recommended maximum of 22kg at 4710RPM. The operating ambient temperature range is -40℃~65℃. Viewed from above, L-marked propellers rotate clockwise with the motor, while R-marked propellers rotate counterclockwise. Installation requires medium-strength or stronger anaerobic threadlocker on the mounting screws. Operate within the recommended maximum thrust, as exceeding the thrust limit will damage the blades.

Motors & ESCs

Specifications

T-Motor NS30*10 specifications
Specification	Value & conditions
Model	30*10
Product type	Carbon-fiber propeller
Reference weight	72gPer propeller.
Package weight	783.2g
Diameter	30 inches (762.5mm)
Package dimensions	79611184mm
Pitch	10 inches (254mm)
Material	Carbon fiber + resin
Typical thrust	6~10.5kgAt 2580~3350RPM.
Recommended maximum thrust	22kgAt 4710RPM.
Operating ambient temperature	-40℃~65℃
Supplied quantity	Two propellers per pair
Design characteristics	Lightweight, efficient design for longer flight time, with low rotational inertia and strong scratch resistance.
L rotation direction	Propeller and motor rotate clockwise.L-marked propeller, viewed from above.
R rotation direction	Propeller and motor rotate counterclockwise.R-marked propeller, viewed from above.
Threadlocker requirement	Apply medium-strength or stronger anaerobic threadlocker to the mounting screws.When installing the propeller on a motor.
Thrust limitation	Operate within the recommended maximum thrust; exceeding the thrust limit will damage the blades.During operation.