Product overview
The T-MOTOR G28*9.2 Prop-2PCS/PAIR supplies a pair of UAV propellers for installation onto motors. Its integrated two-blade construction uses carbon fiber and epoxy with a glossy surface treatment. The size designation is 28*9.2(711.2mm*233.7mm), with a specified single-blade weight of 85±5g. Installation orientation follows the propeller markings: L denotes clockwise rotation and R denotes counterclockwise rotation when viewed from above. Motor installation requires medium-strength or stronger anaerobic screw-locking adhesive, and all accessories must be mounted properly.
The propellers have a thrust limitation of 27.5kg, an optimum rotational-speed range of 1500~3700 RPM/min and an ambient temperature range of -40℃~65℃. Inspect them before flight and replace any propeller found to be faulty. Spinning propellers can cause serious injury, and manual bending must not be used to test their strength. The storage specification is -10℃~50℃ at less than 85% humidity; separate storage guidance recommends a temperature between 0 and 40℃ with humidity below 80%.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | T-MOTOR G28*9.2 |
| Supplied configuration | 2 propellers / pair |
| Model size | 28*9.2(711.2mm*233.7mm) |
| T-MOTOR series | 2blades-integrated |
| Weight | 85±5gSingle blade. |
| Material | CF+Epoxy |
| Thrust limitation | 27.5kg |
| Ambient temperature | -40℃~65℃ |
| Optimum rotational speed | 1500~3700 RPM/min |
| Storage temperature and humidity | -10℃~50℃/less than 85%Storage. |
| Surface treatment | Glossy |
| Rotation markings | L indicates clockwise rotation; R indicates counterclockwise rotation.Viewed from above. |
| Thread-locking adhesive | Use medium-strength or stronger anaerobic screw-locking adhesive.Installing propellers onto motors. |
| Accessory mounting | All accessories must be mounted properly. |
| Inspection and replacement | Inspect the propellers and replace any faulty propeller with a new one.Before flight. |
| Recommended storage environment | 0–40℃ at less than 80% humidity.Storage. |
| Manual bending restriction | Do not test propeller strength by bending the propellers by hand. |
| Injury hazard | Spinning propellers may cause serious injury.Spinning propellers. |
Request a quote for G28*9.2 Prop-2PCS/PAIR
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
