ChinaDroneRequest a quote →

Swiwin SW240B

The Swiwin SW240B is an aviation-kerosene turbojet engine delivering 24kg of thrust, with an engine weight of 1740g. It features a brushless starting motor, a fuel pump with two inlets and two outlets, and ECU control supporting fixed speed range control and in-air engine restart.

SwiwinMotors, ESCs & propellers
Thrust
24 kg

Get a free quote

Product overview

The Swiwin SW240B turbojet engine delivers 24kg of thrust and measures 115.4mm in diameter and 277.5mm in length. Engine weight is 1740g. It uses aviation kerosene with 3%~5% lubricating oil, with fuel consumption of ≤780g/min. Its speed range is 38000~116000, with an idle speed of 38000 RPM. The rated maximum exhaust temperature is 750℃, and the maintenance cycle is 25H. The independently developed brushless starting motor has a speed of 97,000 RPM.

The SW240B features an independently developed ECU control system with fixed speed range control and in-air engine restart. Its ECU uses a 32-bit high-speed chip, while a single bus transmits data signals. The fuel pump uses two inlets and two outlets to break bubbles and help prevent bubble-induced engine stalling, with a 6 mm inlet and 4 mm delivery connection. System equipment comprises power, throttle and signal lines, a GSU, brushless fuel pump, ECU(V3), filter and switch valve.

Motors & ESCs

Specifications

Swiwin SW240B specifications
SpecificationValue & conditions
Pump Voltage0.5-1.2V
RPM ACC25
Eject time0.5S
RPM Start Up Ramp100
RPM DEC25
Ejection Low Volt4V
Pump Start Up Ramp3
Idle RPM range38000~116000
Run Voltage4V
Valve setting40
Cooling setting5000
Thrust24kg
Diameter115.4mm
Length277.5mm
Engine weight1740g
Speed range38000~116000
Idle RPM38000
Maximum temperature750℃Rated exhaust.
Fuel consumption≤780g/min
Lubricating oil3%~5%
Maintenance cycle25H
Manufacturer, model and product typeSwiwin SW240B turbojet engine
Fuel usedAviation kerosene
Starting motorIndependently developed brushless starting motor; RPM: 97,000
Fuel pump construction and connectionsIndependently developed pump with two inlets and two outlets to break bubbles and help prevent bubble-induced engine stalling; 6 mm oil inlet; 4 mm oil delivery
Bus controlOne bus transmits data signals
ECU functions and processorIndependently developed ECU with fixed speed range control, in-air engine restart and a 32-bit high-speed chip
System equipmentPower line, throttle line, signal line, GSU, brushless fuel pump, ECU(V3), filter and switch valve
Ignition RPM3000
Preheat RPM5000

Related guides