ChinaDroneRequest a quote →

SW190B

The Swiwin SW190B is a 19kg-thrust turbojet engine for aircraft propulsion, measuring 109mm in diameter and 258mm in length. It combines a brushless starting motor, a dual-inlet, dual-outlet fuel pump and ECU control with in-air restart capability. The engine runs on aviation kerosene with 3%~5% lubricating oil.

SwiwinMotors, ESCs & propellers
Thrust
19 kg
Weight
1.5 kg

Get a free quote

Product overview

The Swiwin SW190B turbojet engine provides 19kg of thrust for aircraft propulsion. Its body measures 109mm in diameter and 258mm in length, with a weight of 1500g. The engine uses aviation kerosene with 3%~5% lubricating oil and has fuel consumption of ≤550g/min. Its speed range is 38000~120000, with an idle speed of 38000 RPM. Rated maximum exhaust temperature is 750℃, and the maintenance cycle is 25H.

The SW190B incorporates an independently developed brushless starting motor and a fuel pump with two inlets and two outlets. This pump arrangement breaks up bubbles to help prevent bubble-induced engine stalling, with a 6 mm inlet and 4 mm delivery connection. Single-bus communication carries data signals between the engine and control system. The independently developed ECU uses a 32-bit high-speed chip and supports fixed-speed control and in-air restart. Associated equipment includes power, throttle and signal lines, GSU, brushless fuel pump, ECU(V3), filter, switch and valve.

Motors & ESCs

Specifications

SW190B specifications
SpecificationValue & conditions
ProductSW190B turbojet engine
Thrust19kg
Diameter109mm
Length258mm
Weight1500g
Speed range38000~120000
Idle RPM38000
Rated exhaust maximum temperature750℃
Fuel consumption≤550g/min
FuelAviation kerosene
Lubricating oil3%~5%
Maintenance cycle25H
Pump Voltage0.5-1VEngine start setting.
RPM ACC25Engine operation setting.
Eject time0.5SStarting motor setting.
RPM Start Up Ramp100Engine start setting.
RPM DEC25Engine operation setting.
Ejection Low Volt3.5VStarting motor setting.
Pump Start Up Ramp3Engine start setting.
Idle RPM range38000~120000Engine operation setting.
Run Voltage4VStarting motor setting.
Valve20Engine start setting.
Cooling5000Starting motor setting.
Starting motor constructionIndependently developed brushless starting motor
Fuel pump designIndependently developed fuel pump with two inlets and two outlets, designed to break up bubbles and help prevent bubble-induced engine stalling
Oil inlet6 mmFuel pump connections.
Oil delivery4 mmFuel pump connections.
Control communicationSingle-bus data signal transmission
ECU functionsIndependently developed ECU with fixed-speed control, in-air engine restart and a 32-bit high-speed chip
Associated equipmentPower line, throttle line, signal line, GSU, brushless fuel pump, ECU(V3), filter, switch and valve

Related guides