Product overview
The SwellPro Spry+ combines an onboard camera, brushless propulsion and a waterproof remote controller in a compact action-filming platform. Its aircraft measures 233.5 × 249 × 90mm and weighs 538g without the 220g battery. The propulsion arrangement uses 2206 1400KV motors, 30A electronic speed controllers and #6045 propellers. A tempered-glass dome protects the camera, with optical and hydrophobic coatings plus a shade intended to reduce glare around reflective water and snow.
The camera pairs a 1/2.3-inch CMOS sensor with 12MP photography and recording modes reaching 3840 × 2160 at 30P. Electronic image stabilization supports smoother footage, while recording uses a Class 10 or UHS-1-or-higher Micro SD card up to 64GB. The controller incorporates a waterproof 4.3-inch display for camera video and flight status, allowing operation without a phone. Optional GL1 goggles extend FPV viewing, and an added TrollSafe accessory enables tension-triggered fishing-line and bait release.
Flight time is 15–17 minutes, with an approximately 90-minute aircraft battery charge. The specified control and maximum flight ranges reach 800m, while image transmission extends approximately 500m. GPS and ATTI modes provide different levels of position and altitude assistance, alongside manual control. Acro operation requires appropriate firmware configuration and a dedicated ACRO controller, and is disabled by default. Operating temperature spans -10°C to 40°C; maximum flight altitude is 200m and maximum tracking speed is 10m/s.
Specifications
| Specification | Value & conditions |
|---|---|
| Water operation | Floats and supports takeoff and landing on waterApplies to the Spry+ aircraft |
| Automatic return | Returns to the remote controller's positionUses GPS built into the remote controller |
| Product status | DiscontinuedThe model will not become available again |
| Product configuration and purpose | SwellPro Spry+ is an all-in-one waterproof action drone and flight platform. |
| Water protection | The aircraft and remote controller are waterproof and corrosion-resistant. |
| Aircraft dimensions | Axis diameter: 270mm; length × width × height: 233.5 × 249 × 90mm. |
| Aircraft and battery weight | Aircraft: 538g excluding battery; battery: 220g.Aircraft weight excludes the battery. |
| Propulsion hardware | 2206 1400KV brushless motors, 30A brushless ESCs and #6045 propellers. |
| Aircraft battery and charging | 3S 3600mAh LiHV battery; charging time approximately 90 minutes. |
| Image transmission | 5.8G, 8CH; image transmission range ~500m. |
| Flight duration, range and altitude |
|
| Flight speeds |
|
| Manual-mode speed and acceleration | Maximum speed: 65 KM/H in manual mode; acceleration from 0 to 65 KM/H in 5 seconds.65 KM/H maximum speed applies in manual mode. |
| Positioning and hover accuracy | GPS/GLONASS positioning; hover accuracy: ±0.5m. |
| App control functions | Automatic takeoff, automatic hover, automatic return home, point flight, circle flight, flight-route configuration and camera control. |
| Wind resistance and operating temperature | Wind resistance: greater than 10m/s; operating temperature: -10°C to 40°C. |
| Remote controller construction and weight | Surface-buoyant remote controller; weight: 500g including battery.Controller weight includes its battery. |
| Remote controller radio |
|
| Remote controller power |
|
| FPV monitor receiver | Frequency band: 5645–5965HMZ; 8 image reception channels. |
| FPV display | 4.3-inch screen; 800 × 480 pixels; brightness: 600 cd/m². |
| Integrated viewing interface | An integrated waterproof LED display shows live camera video and flight status without requiring a phone. |
| Camera sensor and optics | 1/2.3-inch CMOS, 12M sensor; F4.53mm f/2.65 lens; angle: 92.6°; ISO range: 100–1600. |
| Still image resolution and format | 12MP photographs at 16:9. |
| Video recording modes | 3840 × 2160 30P; 2704 × 1524 30P; 1920 × 1080 30P/60P/120P; 1280 × 720 240P. |
| Recording bitrate and file formats |
|
| Recording storage | Micro SD storage up to 64GB, Class 10 or UHS-1 or higher.Micro SD card must meet Class 10 or UHS-1 specifications or higher. |
| Image stabilization | Software-based electronic image stabilization (EIS). |
| Camera enclosure | Tempered-glass camera dome with optical coating, glare-reducing shade and hydrophobic coating. |
| Flight modes and Acro requirements | GPS mode holds position and altitude; ATTI holds altitude; manual mode does not hold position; Acro enables advanced aerobatic control for trained pilots.Acro mode requires suitable firmware configuration and a specially designed ACRO remote controller; it is disabled by default. |
| Follow and orbit functions | Automatic following at a set distance and height; circular flight around a central point at a set radius while keeping the subject centered.Follow mode uses the remote controller's position; orbit mode uses a selected center and radius. |
| Optional FPV viewing | Optional GL1 FPV goggles.GL1 FPV goggles are optional equipment. |
| Fishing accessory integration | TrollSafe integration enables automatic fishing-line and bait release triggered by line tension.Requires the added TrollSafe accessory; release occurs when line tension exceeds a threshold. |
Request a quote for SwellPro Spry+
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
