Product overview
The Sonicmodell F1 Wing is a compact fixed-wing platform for high-speed FPV racing, with an 833mm wingspan and 420mm length. Its symmetric airfoil is designed around a 4S power system, and its specified flying-speed range is 20km/h - 190+km/h. The molded high-density EPP wing and fuselage incorporate a carbon fiber spar. Detachable wings support transport, while built-in plastic aileron hinges form part of the control architecture. Assembly uses a no-glue design, and a raised CG mark beneath the main wing provides a balancing reference.
The internal equipment hatch provides space for FPV gear and a 4S battery, with a NACA air inlet and outlet for equipment cooling. Aerodynamic plastic covers protect the digital servo arms, and a plastic cover beneath the fuselage protects against landing scratches. For power-system selection, the recommended battery is 14.8V 1800-2200mAh 30C. The PNP specification pairs a 2216 2000kv motor with a 5mm shaft, a 40A 3-4S ESC using an XT60 connector, two 9g digital servos and a default 6x4.5 propeller.
Procurement requires choosing between the equipped PNP configuration and the unassembled airframe-only KIT. The PNP includes one F1 Wing with its motor, ESC and servos pre-installed. The KIT supplies foam and plastic parts, hardware, plywood, and carbon fiber strip and tube; its motor, ESC, servos, propeller and battery are recommended components rather than included equipment. Both configurations exclude the FPV camera, battery and radio controller. These exclusions leave the buyer responsible for supplying the imaging, energy and radio-control equipment needed to complete the intended FPV configuration.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | SONICMODELL F1 Wing |
| Product configurations | FPV racing wing RC airplane offered in KIT and PNP configurations. |
| Wingspan | 833mm (33") |
| Length | 420mm (16.53") |
| Flying speed | 20km/h - 190+km/h |
| Airframe construction | High-density molded EPP wing and fuselage with a pre-built-in carbon fiber spar. |
| Wing structure | Detachable wing structure for compact transport. |
| Airfoil and intended power system | Symmetric airfoil designed around a 4S power system. |
| Aileron hinges | Built-in plastic aileron hinges. |
| Assembly | No-glue assembly. |
| Equipment accommodation | Internal hatch accommodates FPV equipment and a 4S battery. |
| Equipment cooling | NACA air inlet and outlet for FPV equipment cooling. |
| Servo protection | Aerodynamic plastic cover protects the digital servo arm. |
| Fuselage underside protection | Plastic underside cover protects against landing scratches. |
| Center-of-gravity reference | Raised CG mark beneath the main wing. |
| Motor | 2216 2000kv; shaft diameter: 5mm.PNP configuration. |
| ESC | 40A, 3-4S, XT60 connector.PNP configuration. |
| Servos | 2 × 9g digital servos.PNP configuration. |
| Propeller | 6x4.5PNP configuration; default propeller. |
| Recommended battery | 14.8V 1800-2200mAh 30C.PNP configuration; recommended battery is not included. |
| Supplied equipment and exclusions | 1 × F1 Wing PNP with pre-installed motor, ESC and servos. FPV camera, battery and radio controller are not included.PNP configuration. |
| Recommended motor | 2216 2000kv; shaft diameter: 5mm.KIT configuration; recommended part, not included. |
| Recommended ESC | 40A, 3-4S, XT60 connector.KIT configuration; recommended part, not included. |
| Recommended servos | 2 × 9g digital servos.KIT configuration; recommended parts, not included. |
| Recommended propeller | 6x4.5KIT configuration; recommended part, not included. |
| Recommended battery | 14.8V 1800-2200mAh 30C.KIT configuration; recommended battery, not included. |
| Kit contents and exclusions | 1 × unassembled F1 Wing airframe kit containing all foam parts, plastic parts, hardware, plywood, carbon fiber strip and tube. FPV camera, battery and radio controller are not included.KIT configuration; supplied unassembled. |
Request a quote for Sonicmodell F1 Wing 833mm KIT/PNP
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.