ChinaDroneRequest a quote →
SkyRC E455 Multi Chemistry Charger with gray vented housing and front battery connectorsSkyRC E455 Multi Chemistry Charger with gray vented housing and front battery connectors

SKYRC E455 Multi Chemistry Charger

The SkyRC E455 Multi Chemistry Charger is a 50W AC balance charger for 2-4S LiPo, LiFe and LiHV batteries, with support for 6-8S NiMH packs. Its compact plastic housing integrates push-button controls, selectable 1A-4A charging, an XT60 connector, a combined balance port and capacity indicators.

SKYRCDrone battery chargers
Weight
191 g

Get a free quote

Product overview

The SkyRC E455 Multi Chemistry Charger charges 2-4S LiPo, LiFe and LiHV batteries in balance mode and supports 6-8S NiMH batteries. Its 100-240V AC input feeds a 50W charging circuit, with four selectable current settings of 1A, 2A, 3A and 4A, each with ±10% tolerance. Push-button controls select battery chemistry and charging current, allowing the current setting to suit battery capacity. A battery type indicator and current and capacity LEDs provide status information during use.

Built in a plastic case measuring 110x70x40mm, the E455 weighs 191g. It incorporates an XT60 battery connector, an AC power jack and a combined 2S/3S/4S balance port. The built-in balancer has a balancing current drain of 300mA, while short circuit and reverse polarity protection support charging operation. Cell termination voltages are 4.2V±0.02V for LiPo, 4.35V±0.02V for LiHV and 3.6V±0.02V for LiFe; NiMH charging uses negative delta-voltage termination. Capacity LEDs flash at successive 25%, 50%, 75% and 100% indication stages.

Batteries & charging

Specifications

E455 Multi Chemistry Charger specifications
SpecificationValue & conditions
ProductSkyRC E455 Multi Chemistry Charger
Product codeSK-100170
Case materialPlastic
Case size110x70x40mm
Weight191g
AC input100-240V
Battery typesLiPo/LiFe/LiHV/NiMH
Cell count2-4SLiPo/LiFe/LiHV batteries.
Cell count6-8SNiMH batteries.
Selectable charge current1A/2A/3A/4A ± 10%
Cell termination voltage4.2V±0.02VLiPo batteries.
Cell termination voltage4.35V±0.02VLiHV batteries.
Cell termination voltage3.6V±0.02VLiFe batteries.
Charge termination method- ΔVNiMH batteries.
Circuit power50W
Balancing current drain300mA
Charging modeBalance modeLiPo, LiFe and LiHV batteries with 2-4 cells.
ProtectionShort circuit and reverse polarity protection
Built-in balancerBuilt-in balancer
Balance portCombined 2S/3S/4S balance port
Battery connectorEmbedded XT60 battery connector
ControlsPush-button selection of battery type and charge current
Indicators and connectionsBattery type indicator and button; current and capacity LED indicator; current switch; AC 100-240V power jack; battery socket; balance port
Capacity indication25% capacity indicator LED flashesCapacity less than 25%.
Capacity indication50% capacity indicator LED flashes25% ≤ Capacity less than 50%.
Capacity indication75% capacity indicator LED flashes50% ≤ Capacity less than 75%.
Capacity indication100% capacity indicator LED flashes75% ≤ Capacity less than 100%.

Related guides