ChinaDroneRequest a quote →
SkyRC D200 dual output battery charger with display and front charging portsSkyRC D200 dual output battery charger with display and front charging ports

SKYRC D200 Charger

The SKYRC D200 is a dual output charger for simultaneous charging of two different battery packs. It combines AC power distribution, a built-in cell voltage balancer, battery measurement functions and PC control with an integrated 60W soldering iron, supplied with pencil and chisel spare tips.

SKYRCDrone battery chargers
Battery voltage
2-20 V
Net weight
1.26 kg
Input voltage
AC100-240 V / DC 11-20 V

Get a free quote

Product overview

The SKYRC D200 charges two different battery packs simultaneously through its dual outputs. It accepts AC100-240V or DC 11-20V input and supports LiPo, LiFe, Lilon and LiHV batteries with 1-6S cell counts, NiMH and NiCd batteries with 1-15S cell counts, and Pb batteries rated at 2-20V. With AC input, its 200W charging power supports distribution between the channels. With DC input, channel A provides 200W and channel B provides 100W. Charge current adjusts from 0.1-20A on channel A and 0.1-10A on channel B.

A built-in cell voltage balancer works alongside voltage and internal resistance measurement for both the battery pack and individual cells. The D200 stores 20 charge/discharge profiles and provides current, capacity, temperature and charging time protection settings. Charge Master enables PC control, real-time data graphs and firmware updates, while expert users can adjust the end voltage. The charger also incorporates a 60W soldering iron with an adjustable 200-450 ℃ temperature range. Supplied spare tips comprise one pencil tip and one chisel tip.

Batteries & charging

Specifications

SKYRC D200 Charger specifications
SpecificationValue & conditions
Product typeSKYRC D200 dual output charger
Simultaneous chargingCharges two different battery packs simultaneously
Power distributionChannel A maximum output xW; channel B maximum output yW, where y=200-xAC input
Net weight1260g
Input voltageAC100-240V / DC 11-20V
Charge circuit powerCH A 200W / CH B 100WDC input
Charge circuit power200WAC input; supports power distribution
Discharge circuit power2 x 10W
Charge current rangeCH A 0.1-20A / CH B 0.1-10AChannel A / channel B
Discharge current range0.1-5A
Balancing port current drainMax 300mA/cellPer cell
Trickle charging current30mA-300mA & OFF
Battery cell count1-6SLiPo/LiFe/Lilon/LiHV batteries
Battery cell count1-15SNiMH/NiCd batteries
Battery voltage2-20VPb batteries
Charging and discharging supportCharges and discharges 4.35V LiHV batteriesLiHV batteries
Soldering power60WBuilt-in soldering iron
Soldering temperature range200-450 ℃Built-in soldering iron; adjustable temperature
Soldering temperature range in Fahrenheit392-842 ℉Built-in soldering iron
Soldering tips1 pencil tip and 1 chisel tipSupplied spare tips
Integrated equipmentBuilt-in soldering iron
Cell balancingBuilt-in cell voltage balancer
Software protectionCurrent limit, capacity limit, temperature threshold and charging time limit
Profile storageStores 20 charge/discharge profiles for recall without special program settings
Voltage measurementMeasures total battery pack voltage and individual cell voltage
Internal resistance measurementMeasures total battery pack internal resistance and individual cell internal resistance
PC control and firmware updatesPC control, real-time data viewing with graphs and firmware updatesUsing Charge Master
Terminal voltage controlAdjustable end voltageExpert use only

Related guides