Product overview
The DolphinRC 10 inch FPV Frame Kit provides a carbon-plate airframe for freestyle and cinematic FPV assembly. Its True X layout combines four arms with top, bottom and side plates, supported by aluminum columns. The frame weighs 278g and has a 415mm wheelbase. Camera integration accommodates a 19MM-wide FPV camera through a 19*19mm mount, with printed camera parts providing lens retention. Motor mounting holes are M3*16/19mm, and the frame is intended for 10-inch propellers.
The supplied configuration is an airframe kit comprising structural plates, arms, columns, fasteners, printed camera and antenna parts, a non-slip mat and two 25mm x 300mm straps. Electronics and propulsion appear as a recommended build configuration: a Dolphin RC F405 60A Stack, Dolphin RC 3115-900KV motors, GEMFAN 1050 propellers and a 384 thermal imaging FPV camera. That recommendation specifies a default XT90 connector with XT60 optional. The antenna must be installed before power is applied.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | DolphinRC 10 inch FPV Frame Kit; SKU DPJJ0012BK |
| Intended use | 10-inch freestyle and cinematic FPV builds |
| Frame architecture | True X |
| Structural material | High-strength carbon plate |
| Frame | Dolphin RC 10 inchRecommended configuration. |
| Flight controller and ESC | Dolphin RC F405 60A StackRecommended configuration. |
| Motor | Dolphin RC 3115-900KV motorRecommended configuration. |
| Propeller model | GEMFAN 1050Recommended configuration. |
| Camera | 384 Thermal imaging FPV CameraRecommended configuration. |
| Connector | Default XT90; optional XT60Recommended configuration. |
| Specification name | 10 inch fpv frame kit |
| Propeller size | 10 inch |
| Weight | 278g |
| Wheelbase | 415mm |
| Arm thickness | 6M |
| Top plate thickness | 2.5MM |
| Bottom plate thickness | 3MM |
| Side plate thickness | 2MM |
| Camera mount size | 19*19mm |
| FPV camera width compatibility | 19MM |
| Motor mounting holes | M3*16/19mm |
| Structural parts | 1 top plate, 1 bottom plate, 1 side plate and 4 armsSupplied frame kit. |
| Aluminum columns | 4 × m3*25mm and 4 × m3*34mm aluminum columnsSupplied frame kit. |
| Screws | 2 × m2*5mm camera screws; 12 × m3*8mm, 4 × m3*14mm, 4 × m3*16mm, 4 × m3*25mm and 4 × m4*14mm screwsSupplied frame kit. |
| Nuts | 4 × m3 lock nuts, 4 × S-M3-2 riveted nuts and 4 × S-M4-2 riveted nutsSupplied frame kit. |
| Printed camera and antenna parts | 1 left camera part, 1 right camera part, 1 T antenna part and 1 SMA antenna partSupplied frame kit. |
| Mat and straps | 1 non-slip mat and 2 cable straps measuring 25mm x 300mmSupplied frame kit. |
| Antenna installation requirement | Install the antenna before applying power.Before powering on. |
| Architecture | True X |
| Camera integration | Compatible with 19MM-wide FPV cameras; upgraded printed section for firmer lens retention |
| Antenna installation | Install the antenna before applying powerBefore powering on. |
Request a quote for DolphinRC 10 inch FPV Frame Kit
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
