Product overview
The JIUSI F10 is a 10-inch FPV drone configured around TH 3115-900KV motors, an F405 55A flight controller and ESC stack, and HQProp 10X4.5X3 propellers. Its motor base structure supports heat dissipation, while the stack provides voltage, current, ESC temperature and motor-speed telemetry. The stated operating figures are a 2.5 kg payload capacity, 8 km video transmission distance, 2,000 m flight altitude, 20 km flight distance and 142 km/h flight speed. The 22-minute endurance figure applies with no payload.
The equipment configuration pairs a PandaRC VT5804-BAT video transmitter with a CADDXFPV Ratel2 camera using a 1/1.8-inch sensor. Integration provisions include two transmitter mounting patterns, 30.5 × 30.5 and 20 × 20, with no units specified, plus adjustable 0–2.5 W transmission power. The Radiomaster TX12 controller incorporates ExpressLRS, an STM32F407 processor, USB-C with QC3.0 charging, adjustable Hall-effect gimbals and an SD card. EdgeTX is the factory operating system, with OpenTX also supported. The stack is rated at 55 A continuous and 65 A momentary.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | JIUSI F10 |
| Platform type | 10-inch FPV drone |
| Payload capacity | 2.5 kg |
| Video transmission distance | 8 km |
| Flight altitude | 2,000 m |
| Flight distance | 20 km |
| Flight speed | 142 km/h |
| Flight endurance | 22 minutesUnloaded. |
| Motor | TH 3115-900KV |
| Motor base architecture | Base structure designed for heat dissipation |
| Flight controller and ESC stack | F405 55A |
| Stack current rating | 55 AContinuous current. |
| Stack peak current | 65 AMomentary current. |
| Supported telemetry | Voltage, current, ESC temperature and motor speed |
| Propellers | HQProp 10X4.5X3 |
| Video transmitter | PandaRC VT5804-BAT |
| Video transmitter diagnostic function | Built-in power self-check |
| Video transmitter frequency lock | Frequency locking to avoid interfering with other operators at startupAt power-on. |
| Mounting hole patterns | 30.5 × 30.5 and 20 × 20; units unspecifiedVideo transmitter mounting. |
| Transmission power range | 0–2.5 WAdjustable video transmitter power. |
| Camera | CADDXFPV Ratel2 |
| Sensor format | 1/1.8 inchCamera sensor. |
| Remote controller | Radiomaster TX12 |
| Radio module | Built-in ExpressLRS moduleRemote controller. |
| Main processor | STM32F407Remote controller. |
| USB interface and charging | USB-C; QC3.0 fast chargingRemote controller. |
| Gimbals and travel adjustment | Hall-effect gimbals with travel adjustment without opening the housingRemote controller. |
| Operating system support | EdgeTX installed by default; EdgeTX and OpenTX supportedRemote controller; factory default. |
| Grip and slider controls | Upgraded rear grip and S1/S2 side slidersRemote controller. |
| Storage | Built-in SD cardRemote controller. |
