Product overview
The Kpower RDM200T is a dual-output shaft servo for controlled mechanical movement in fixed-wing drones, industrial automation and intelligent electric vessels. Its architecture combines a brushless motor, precision-machined steel gears and a single-piece 6061 aluminum alloy housing. An absolute magnetic encoder provides closed-loop position feedback for multi-turn 360° angle control, with angle detection accuracy of ±0.05°. The dual-output bearing arrangement supports the mechanical output, while the specified bearing configuration is 2BB.
Integration requires space for a 69x32x56mm body, a 300g (10.58oz) component mass and a 12-24V supply. Torque reaches 200kg·cm at stall, with 4000mA stall current; the separate no-load speed is 0.17sec/60°. The listed configuration uses TTL signaling, IP42 protection and a -10 to 50°C operating range. PWM, RS485 and CAN are also supported, while IP67 protection and a -40°C low-temperature rating require customization. Travel angle and signaling also support customization, allowing configuration choices within this servo product.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | Kpower RDM200T dual-output shaft high-torque servo |
| Applications | Fixed-wing drones, industrial automation and intelligent electric vessels |
| Output architecture | Dual-output shaft servo |
| Torque | 200kg·cmStall. |
| Speed | 0.17sec/60°No load. |
| Travel angle | 360°Customization supported. |
| Voltage range | 12-24V |
| Dimensions | 69x32x56mm |
| Weight | 300g (10.58oz) |
| Current | 4000mAStall. |
| Case material | Aluminum alloy |
| Gear material | Metal |
| Spline | / |
| Motor | Brushless motor |
| Bearing | 2BB |
| Position sensor | Magnetic encoder |
| Signal and protocol | TTLCustomization supported. |
| Waterproof rating | IP42Customization supported. |
| Operating temperature | -10 to 50°C |
| Housing construction | High-strength 6061 aluminum alloy, machined from a single piece |
| Gear construction | High-precision machined steel gears |
| Position control | Absolute magnetic encoder with closed-loop position control and multi-turn 360° angle control |
| Accuracy | ±0.05°Angle detection. |
| Service life | Up to 800,000 cycles |
| Supported protocols | PWM, TTL, RS485 and CAN |
| Optional environmental ratings | IP67 and -40°C low-temperature ratingsCustomized configuration. |
Request a quote for Kpower RDM200T 200kg dual output shaft high torque servo
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
