ChinaDroneRequest a quote →

RadioMaster GX10 Radio Controller

The RadioMaster GX10 is a compact gamepad-style radio controller for pilots, combining EdgeTX firmware with an internal ExpressLRS system for 2.4GHz or Sub-G 900MHz operation. Hall sensor gimbals, a 2.8-inch touchscreen and programmable RGB buttons provide control, while the supplied carry case, antenna and accessories complete the package.

RadioMasterRC transmitters & receivers
Channels
Up to 16 channels
Operating Voltage
6.6 – 8.4 V DC
Weight
456 g
Dimensions
180 × 165 × 83 mm

Get a free quote

Product overview

The RadioMaster GX10 puts pilot control into a compact, ergonomic gamepad-style radio controller measuring 180 × 165 × 83 mm and weighing 456 g excluding batteries. Its STM32H7 processor runs EdgeTX 2.12.0 or later, while a Semtech LR1121 transceiver provides ExpressLRS operation on 2.4GHz ISM or Sub-G 900MHz, depending on configuration. Channel support extends to 16 channels, depending on the receiver. X4-V2 Hall sensor gimbals feature programmable LED light rings, and six programmable RGB buttons give direct access to flight modes, telemetry callouts, EdgeTX functions and custom functions.

A top-mounted 2.8-inch IPS touchscreen provides 320 × 240 resolution. The GX10 includes a motion sensor for tilt-activated logic switches, camera gimbal control and telemetry callouts, plus a microphone for custom sound recording. Its 512MB onboard flash stores models, firmware, sounds, images and Lua scripts. An optional 32GB/FAT32 MicroSD card disables onboard flash when inserted; the card is not included. Power comes from two 18650 Li-ion batteries, also not included, within a 6.6–8.4V DC operating range. Maximum current is 850mA at 8.4V and maximum output power. Integrated balanced charging, a low-noise fan and an aluminum heat sink support operation.

The GX10 comes fitted with a flush-fitting, rotating 2.4GHz-only antenna and includes a separate Dual-Band antenna for 2.4GHz and Sub-G operation. USB-C connectivity supports UF2 upgrades, and a Nano module bay provides an external module interface. The supplied kit includes the controller, GX10 carry case, gimbal protector, Dual-Band antenna, MMCX removal tool, Type-C cable, screen protector and 1.5mm hex wrench. Two slider delete grommets, seven switch delete grommets, a RadioMaster sticker set, GX10 manual and inventory card complete the package.

Links & controllers

Specifications

RadioMaster GX10 Radio Controller specifications
SpecificationValue & conditions
High-Performance MCUSTM32H7 processor
Top Mounted IPS Touchscreen Display2.8-inch 320×240 IPS touchscreen
Precision Hall Sensor GimbalsStandard X4 V2 Hall sensor gimbals
Internal ExpressLRS RF SystemBuilt-in Semtech LR1121 RF transceiver supporting ExpressLRS on 2.4GHz or Sub-G 900MHz2.4GHz or Sub-G 900MHz configuration.
Low-Profile Rotating AntennaFlush-fitting rotating 2.4GHz antenna supplied; Dual-Band antenna also includedFlush-fitting antenna is 2.4GHz only; included Dual-Band antenna supports 2.4GHz and Sub-G operation.
ItemGX10 Radio
Dimensions180 × 165 × 83 mm
Weight456 gExcluding batteries.
Frequency Range2.4GHz ISM or Sub-G 900MHzDepending on configuration.
Internal RFELRS 2.4GHz / Sub-G 900MHz
FirmwareEdgeTXRequires 2.12.0 or later.
Internal RF FirmwareExpressLRS 3.6.3
Built-in Flash512MB
MicroSD Card32GB/FAT32Card not included; inserting a MicroSD card disables the onboard flash.
ChannelsUp to 16 channelsReceiver dependent.
Display2.8-inch IPS Touchscreen 320 × 240 Resolution
Built-in Motion SensorYes (SC7U22)
Antenna Gain2dB
Maximum Current850mA@8.4V at maximum output powerAt 8.4V and maximum output power.
Operating Voltage6.6 – 8.4V DC
Battery Support2 × 18650 Li-ion batteriesBatteries not included.
GimbalX4-V2 Hall Sensor Gimbals
Gimbal SticksM3
Upgrade MethodUSB-C (UF2)
Programmable ControlsFully programmable gimbal LED light rings and six fully programmable RGB buttons for flight modes, telemetry callouts, EdgeTX functions and custom functions
Charging and CoolingIntegrated balanced charging; low-noise cooling fan and aluminum heat sink
Microphone and Motion FunctionsTilt input for logic switches, camera gimbal control and telemetry callouts; built-in microphone supports custom sound recording
Connectivity and Module BayUSB-C connectivity; Nano module bay
Product Design and Storage UseCompact, ergonomic gamepad-style radio controller for pilots; storage for models, firmware, sounds, images and Lua scripts
Package Contents1 × GX10 Radio Controller; 1 × GX10 Carry Case; 1 × Gimbal Protector; 1 × Dual-Band Antenna; 1 × MMCX Removal Tool; 1 × Type-C Cable; 1 × Screen Protector; 1 × 1.5mm Hex Wrench; 2 × Slider Delete Grommets; 7 × Switch Delete Grommets; 1 × RadioMaster Sticker Set; 1 × GX10 Manual; 1 × Inventory CardIncluded equipment.

Related guides