ChinaDroneRequest a quote →

RadioMaster GX10 Max Radio Controller

The RadioMaster GX10 MAX is a compact gamepad-style radio controller combining EdgeTX firmware, an internal ExpressLRS transceiver and AG01 mini V2 CNC Hall Sensor Gimbals. Its touchscreen, programmable RGB buttons and motion sensor support flight controls and custom functions. A carbon-look shell, integrated balance charging and supplied carrying and protection accessories complete the package.

RadioMasterRC transmitters & receivers
Channels
Up to 16 channels
Operating voltage
6.6 – 8.4 V DC
Weight
485 g
Dimensions
180 × 165 × 83 mm

Get a free quote

Product overview

The RadioMaster GX10 MAX Radio Controller brings EdgeTX operation and ExpressLRS radio control into a compact gamepad-style design. Its STM32H7 processor supports model loading and script execution, while the built-in Semtech LR1121 transceiver operates on 2.4GHz ISM or Sub-G 900MHz, depending on configuration. Up to 16 channels are supported, depending on the receiver. A top-mounted 2.8-inch IPS touchscreen provides a 320 × 240 interface, and six programmable RGB buttons give direct access to flight modes, telemetry callouts, EdgeTX functions and custom functions.

The carbon-look shell houses AG01 mini V2 CNC Hall Sensor Gimbals with programmable LED light rings and an anodized CNC aluminum scroll wheel. Gold, Red and Transparent Charcoal color options complement the 180 × 165 × 83 mm body, which weighs 485 g excluding batteries. A built-in motion sensor enables tilt control of camera gimbals, logical switches and EdgeTX functions, while the microphone supports custom sound recording. Integrated balance charging, a low-noise cooling fan and an aluminum heat sink complete the internal hardware.

The GX10 MAX operates on 6.6 – 8.4V DC using two 18650 Li-ion batteries, which are not included. Maximum current is 850mA at 8.4V and maximum output power. It includes 512MB of flash and supports a 32GB/FAT32 MicroSD card; the card is not included, and inserting one disables onboard flash. Supplied equipment includes a rotating 2.4GHz-only antenna, a dual-band antenna, carry case, gimbal protector, Type-C cable, screen protector, MMCX removal tool, 1.5mm hex wrench, two slider delete grommets, seven switch delete grommets, sticker set, manual and inventory card.

Links & controllers

Specifications

RadioMaster GX10 Max Radio Controller specifications
SpecificationValue & conditions
ProductRadioMaster GX10 MAX Radio Controller
ProcessorSTM32H7
Top-mounted display2.8-inch IPS touchscreen; 320 × 240 resolution
Internal RF systemBuilt-in Semtech LR1121 transceiver; ELRS 2.4GHz / Sub-G 900MHz2.4GHz or Sub-G 900MHz configuration.
Supplied antennasLow-profile rotating 2.4GHz antenna and dual-band antennaSupplied flush-fitting antenna supports 2.4GHz only; included dual-band antenna supports 2.4GHz and Sub-G operation.
Shell finishCarbon-look shell exclusive to the GX10 MAX
ColorsGold / Red / Transparent Charcoal
Dimensions180 × 165 × 83 mm
Weight485 gExcluding batteries.
Frequency range2.4GHz ISM or Sub-G 900MHzDepending on configuration.
FirmwareEdgeTXRequires version 2.12.0 or later.
Internal RF firmwareExpressLRS 3.6.3
Built-in flash512MB
MicroSD card32GB/FAT32MicroSD card is not included; inserting a MicroSD card disables onboard flash.
ChannelsUp to 16 channelsReceiver dependent.
Built-in motion sensorYes (SC7U22)
Antenna gain2dB
Maximum current850mAAt 8.4V and maximum output power.
Operating voltage6.6 – 8.4V DC
Battery support2 × 18650 Li-ion batteriesBatteries not included.
GimbalsAG01 mini V2 CNC Hall Sensor Gimbals
Stick end threadM3
Upgrade methodUSB-C (UF2)
Programmable controlsProgrammable gimbal LED light rings, anodized CNC aluminum scroll wheel and six fully programmable RGB buttons for flight modes, telemetry callouts, EdgeTX functions or custom functions
Charging and coolingIntegrated balance charging; low-noise cooling fan and aluminum heat sink
Motion and audio functionsTilt control for camera gimbals, logical switches and EdgeTX functions; built-in microphone supporting custom sound recording
Module bay and connectivityNano module bay; USB-C connectivity
Package contents1 GX10 MAX Radio Controller; 1 GX10 Carry Case; 1 Gimbal Protector; 1 Dual-Band Antenna; 1 MMCX Removal Tool; 1 Type-C Cable; 1 Screen Protector; 1 1.5mm Hex Wrench; 2 Slider Delete Grommets; 7 Switch Delete Grommets; 1 RadioMaster Sticker Set; 1 GX10 Manual; 1 Inventory Card

Related guides