ChinaDrone.Request a quote ↗
COMPONENT

RadioLink R9DS

By RadioLink Electronic Limited ↗

The RadioLink R9DS is a 9/10-channel radio-control receiver with simultaneous SBUS and PWM outputs for aircraft and other models. Supplied as one receiver with a packing bag, it supports selected RadioLink transmitters and module-dependent telemetry. Its specified 4000-meter range requires an unobstructed, interference-free environment; two differing voltage ranges are stated.

Request a quote ↗
RadioLink R9DS receiver with antenna wire and labeled connection ports
RadioLink R9DS receiver with antenna wire and labeled connection ports
Product identity and typeRadioLink R9DS 9/10-channel receiver
Control distance4000 meters (2.48 miles)Maximum range tested in an unobstructed area free of interference.
Spread spectrumDSSS and FHSS hybrid spread spectrum
Frequency hopping16-channel pseudo-random frequency hopping
ModulationQPSK
PWM jitterMaximum 1.84us; standard 0.25us

Product overview

The RadioLink R9DS is a receiver component for integration into radio-controlled models, including rotary-wing aircraft, fixed-wing aircraft, gliders and multicopters, as well as cars, boats and robots. Its control interface provides 9/10 channels through SBUS and PWM, with both outputs able to operate simultaneously. The radio architecture combines DSSS and FHSS spread spectrum, 16-channel pseudo-random frequency hopping and QPSK modulation. Compatible transmitters are the RadioLink AT10II, AT10, AT9S Pro, AT9S and AT9.

The supplied configuration contains one R9DS receiver and one packing bag. Telemetry functionality depends on the paired flight module: PRM-01 enables transmitter-screen model-voltage display, while PRM-03 adds motion, position, attitude and other flight information. The specified 4000-meter control distance applies to an unobstructed area free of interference. Electrical figures include a 3–10-volt operating tolerance and a separate 3.6–12V input rating; these differing ranges leave the applicable supply limits unresolved.

Specifications

SpecificationValue & conditions
Product identity and typeRadioLink R9DS 9/10-channel receiver
Control distance4000 meters (2.48 miles)Maximum range tested in an unobstructed area free of interference.
Spread spectrumDSSS and FHSS hybrid spread spectrum
Frequency hopping16-channel pseudo-random frequency hopping
ModulationQPSK
PWM jitterMaximum 1.84us; standard 0.25us
Signal outputs9/10 channels; simultaneous SBUS and PWM output
Supported model typesRotary wing, fixed wing, glider, multicopter, car, boat, and robot
Operating voltage tolerance3 to 10 volts
Input voltage3.6–12V
PRM-01 telemetryModel voltage displayed on the transmitter screenPaired with flight module PRM-01.
PRM-03 telemetryTransmitter display of model voltage, speed, climb, throttle, longitude, latitude, altitude, GPS, RSSI, flight mode, yaw, roll, pitch, and distanceWith flight module PRM-03.
Compatible transmittersRadioLink AT10II, AT10, AT9S Pro, AT9S, and AT9
Package contents1 × R9DS receiver; 1 × packing bagSupplied package.
SOURCE WITH CHINADRONE

Request a quote for RadioLink R9DS

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
RadioLink T8FB(BT) radio transmitter with silver and black housing, dual control sticks and antenna.
Links & controllers

RadioLink T8FB(BT)

By RadioLink

The RadioLink T8FB(BT) is an eight-channel radio transmitter for aircraft and surface models, with dual-stick controls, Bluetooth setup and USB configuration. Its standard R8EF supports SBUS, PPM and PWM. Battery options include an 18650 lithium battery, which must have a JST connector and fit the 115 × 35.5 × 24mm battery compartment.

RadioLink R12DSE receiver with dual antennas and connector pins
Links & controllers

RadioLink R12DSE

By RadioLink

The RadioLink R12DSE is a compact, 12-channel, dual-antenna receiver with SBUS/PPM output and built-in telemetry for UAV and FPV aircraft integration. It supports selected RadioLink transmitters, accepts 3–6 V DC and specifies 4,000 m airborne control distance. The package includes a PRM-03 connection cable; expanded telemetry requires additional hardware.