Product overview
The Radiolink BDS200 is a brushless soccer drone for training and competition, built around an all-resin ball frame that encloses the propellers through 360 degrees. Its tumbler design supports recovery after falls, complemented by a motor-reversing recovery mode. The propulsion package combines SZ-SPEED 1303 10000KV motors and Gemfan 2520 propellers with a 1.5 axis hole. A Radiolink flight controller stack incorporates a 4-in-1 ESC. The stack, batteries, motors, ESC and propellers use standard parts and interfaces, supporting replacement of these components.
Gyroscope, accelerometer and barometer inputs feed a Kalman filter altitude-hold algorithm. One button switches between Altitude-hold and Stabilize modes, while the CH8 roller switch reverses the motors for recovery after an overturn. The RTF version includes an eight-channel T8S(BT) transmitter with 0.25-microsecond joystick control accuracy. Its airborne control distance is 2000 meters (1.24 miles); flight data was measured in a good flight environment, and actual control depends on flight conditions. Bluetooth-connected Android or iOS software supports parameter changes and transmitter, receiver and power-battery voltage alarm settings.
The supplied package is a flight platform with a T8S transmitter, Gensace battery, CM210 2S balance charger, charging and upgrade cables, screwdriver, hook and spring, and bag. The 7.4V 850mAh 35C LiPo battery provides a six-minute flight time under good flight conditions; actual control depends on flight conditions. Below 6.7V, a green warning light flashes and slow descent begins five seconds later. The CM210 provides 1.5A charging through a Type-C input. International competition flight space is 16m × 7m × 4.5m.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | Radiolink BDS200. |
| Product purpose | Soccer drone for competitions. |
| Protective architecture | High-toughness frame with 360-degree enclosing protection around the propellers. |
| Frame material | Lightweight, crash-resistant all-resin material. |
| Ball frame design | Patented tumbler ball frame designed to support recovery to the original position.After a fall. |
| Flight controller and ESC | Radiolink flight controller stack with 4-in-1 ESC. |
| Altitude control | Gyroscope, accelerometer and barometer inputs with a Kalman filter altitude-hold algorithm. |
| Motors | SZ-SPEED 1303 10000KV brushless motors. |
| Propellers | Gemfan 2520 propellers with 1.5 axis hole. |
| Battery | Gensace 7.4V 850mAh 35C LiPo battery. |
| Flight time | 6 minutes.With the Gensace 7.4V 850mAh 35C LiPo battery; flight data measured in a good flight environment, with actual control dependent on flight conditions. |
| Replacement component interfaces | Stack, batteries, motors, ESC and propellers use standard parts and interfaces. |
| Charger | CM210 1.5A 2S LiPo charger with Type-C input. |
| Charging time | 20 minutes.Using the CM210 LiPo charger. |
| Charger power sources | Computer USB port, power bank, mobile phone adapter or car charger.For the CM210 charger. |
| Transmitter channels and adjustment | Included eight-channel remote controller with parameter adjustment through a mobile phone app.RTF version. |
| Transmitter model | T8S(BT).RTF remote-controller configuration. |
| Joystick control accuracy | 0.25 microseconds.T8S(BT) transmitter in the RTF remote-controller configuration. |
| Control distance | 2000 meters (1.24 miles).T8S(BT) transmitter, in air; flight data measured in a good flight environment, with actual control dependent on flight conditions. |
| Working modes | Altitude-hold, Stabilize and Flip Over after Crash modes. |
| Flight mode selection | One-button switching between Altitude-hold and Stabilize modes. |
| Motor-assisted recovery | CH8 roller switch reverses the motors to flip the drone over.After the drone has flipped over. |
| Receiver and telemetry | R8XM receiver with integrated fly-by range telemetry. |
| Low-voltage response | Flight controller green light flashes slowly; the drone begins a slow descent 5 seconds later.Power battery voltage below 6.7V. |
| Parameter and voltage alarm adjustment | Adjustable parameters and low-voltage alarm thresholds for the transmitter, receiver and power battery.Bluetooth connection to an Android or iOS mobile app. |
| Flight space | 16m × 7m × 4.5m.International competition flight field. |
| Supplied configuration | One each: BDS200 soccer drone, T8S eight-channel transmitter, Gensace 7.4V 850mAh battery, CM210 2S balance charger, CM210 charging cable, T8S upgrade cable, screwdriver, hook and spring, and bag. |
| Bag cushioning | Thick shock-absorbing foam. |
| Backpack protection and carrying | Dust-proof, waterproof backpack with hand-carry and cross-body carrying options. |
| Backpack organization | Side name-card slot and accessory slots. |
Request a quote for Radiolink BDS200
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.