Product overview
The Radiolink F108 is a compact FPV flight platform for indoor aerial photography, training and racing. Its carbon fiber frame combines a 110mm wheelbase, full-coverage propeller guards, reverse propellers and a dedicated battery compartment. Standard takeoff weight is 165g, with variation possible from batch materials and external factors. SZ-SPEED 1303-10000KV brushless motors drive GEMFAN 2.5-inch (2520) propellers. The ArduBeta_aio controller integrates a 4-in-1 ESC and OSD, alongside an Upixels optical flow and laser module. Available flight modes include PosHold, Alt-Hold, Stabilize, Manual and Turtle.
Video integration supports DJI O3/O4 and Caddx digital transmission systems. Equipped analog RTF versions include EWRF 600mW transmission and a Caddx Sable camera; the PNP version excludes that integrated video equipment. The Sable provides 1200 TVL resolution and fields of view of 130° at 4:3 or 165° at 16:9. Its mounting slot permits 45-degree rotation. An external Type-C port allows parameter adjustment without disassembly, while receiver support covers ELRS, CRSF, SBUS and PPM.
The Gensace 2S 850mAh 35C XT30 LiPo battery supports up to seven minutes of flight. With the T8S(BT) transmitter, airborne control distance is 2000 meters (1.24 miles). These flight figures apply to a good flight environment; actual performance depends on flight conditions. Voltage below 6.8V triggers a rapidly flashing red light and gradual descent. RTF packages include a T8S transmitter, CM210 charger and either 3-inch goggles or a 4.3-inch monitor. The PNP package supplies the aircraft, battery and integration accessories, with no transmitter, viewing equipment or charger listed.
Specifications
| Specification | Value & conditions |
|---|---|
| Position holding | Short-term position holding through inertial navigationWhen optical flow data is unavailable |
| Takeoff weight | 165gStandard aircraft; actual weight may vary due to batch materials and external factors. |
| Wheelbase | 110mm |
| Frame and battery accommodation | Carbon fiber frame with a dedicated battery compartment |
| Propeller protection and arrangement | Full-coverage propeller guards and reverse propeller design |
| Flight controller | Radiolink ArduBeta_aio all-in-one flight controller with integrated 4-in-1 ESC and OSD |
| Positioning sensors | Upixels combined optical flow and laser module |
| Flight modes | PosHold, Alt-Hold, Stabilize, Manual and Turtle modes |
| Additional mode configuration | Additional flight modes can be set in Mission PlannerModes beyond the default selection. |
| Self-righting | Automatic return to the takeoff orientationAircraft upside down with Turtle Mode enabled. |
| Motors | SZ-SPEED 1303-10000KV brushless motors |
| Propellers | GEMFAN 2.5-inch (2520) propellers |
| Battery | Gensace 2S 850mAh 35C XT30 LiPo battery |
| Flight time | Up to 7 minutesGensace 2S 850mAh 35C XT30 LiPo battery; flight data tested in a good flight environment, with actual performance dependent on flight conditions. |
| Flight performance qualification | Actual flight performance depends on flight conditionsFlight data measured in a good flight environment. |
| Camera and resolution | Caddx Sable camera; 1200 TVL horizontal resolutionEquipped analog video versions; PNP excludes the integrated camera. |
| Camera field of view | 130° (4:3) / 165° (16:9)Caddx Sable camera in equipped versions; aspect ratio as specified. |
| Camera mounting movement | 45-degree rotation |
| Digital video integration | Supports DJI O3/O4 and Caddx high-definition digital image transmission systems |
| Receiver | Radiolink R16SM; 1.5g; 16 channels; FHSS and 67-channel pseudo-random frequency hopping |
| Receiver protocol support | ELRS, CRSF, SBUS and PPM |
| Low-voltage response | Rapidly flashing red flight-controller light and gradual descentVoltage below 6.8V. |
| Remote controller and adjustment | 8-channel remote controller; parameter adjustment through a mobile phone or computer appRTF version. |
| Joystick control accuracy | 0.25 microsecondsRTF remote controller. |
| Control distance | 2000 meters (1.24 miles)T8S(BT) transmitter; in the air; flight data tested in a good flight environment, with actual performance dependent on flight conditions. |
| Charger | Radiolink CM210; 1.5A; Type-C input2S LiPo batteries. |
| Parameter connection | External Type-C access for parameter adjustment without disassembly |
| Shell colors | Gray standard; pink, orange and black customization optionsGray shell supplied as standard. |
| Goggles RTF package | F108 ×1 with integrated EWRF 600mW analog video transmission and CADDX camera; Radiolink T8S transmitter ×1; EWRF Tech 3-inch FPV goggles ×1; Gensace 2S 850mAh battery ×1; CM210 balance charger ×1; GEMFAN 2.5-inch (2520) propellers ×4; upgrade Type-C cable ×1; DJI O4 camera mounting ×1; 1.5mm hex wrench ×1; 2.0mm screwdriver ×1; packing bag ×1; DJI O4 cableFPV RTF analog video version with goggles. |
| Monitor RTF package | F108 ×1; Radiolink T8S transmitter ×1; Hawkeye 4.3-inch FPV monitor ×1; Gensace 2S 850mAh battery ×1; CM210 balance charger ×1; GEMFAN 2.5-inch (2520) propellers ×4; upgrade Type-C cable ×1; DJI O4 camera mounting ×1; 1.5mm hex wrench ×1; 2.0mm screwdriver ×1; packing bag ×1; DJI O4 cableFPV RTF analog video version with FPV monitor. |
| PNP flight platform and supplied equipment | Flight platform without integrated EWRF 600mW analog video transmission or CADDX camera. PNP equipment: F108 ×1; Gensace 2S 850mAh battery ×1; GEMFAN 2.5-inch (2520) propellers ×4; upgrade Type-C cable ×1; DJI O4 camera mounting ×1; 1.5mm hex wrench ×1; 2.0mm screwdriver ×1; packing box ×1; DJI O4 cablePNP version. |
Request a quote for F108
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.