| Model | NF-465-M |
|---|
| Product type | Multirotor UAV assembly and adjustment training kit |
|---|
| Training scope | Component testing through complete UAV assembly and adjustment |
|---|
| System composition | Intelligent flight controller, modular UAV components, simulation software and teaching resources including a syllabus, practical training manual and instructional videos |
|---|
| Frame layout and wheelbase | X layout; wheelbase ≥450 mm |
|---|
| Airframe materials | Carbon fiber and aviation aluminum components |
|---|
| Maximum flight time | ≥15 min |
|---|
| Maximum takeoff weight | Greater than 1.5 kg |
|---|
| Operating temperature | -10 to 40°C |
|---|
| Hovering accuracy | Vertical ±0.5 m; horizontal ±1 mGPS mode. |
|---|
| Propellers | ≥9450; plastic |
|---|
| Electronic speed controller current | Continuous operating current ≥30 A; maximum instantaneous current ≤40 A |
|---|
| Electronic speed controller battery compatibility | 2–6S batteries |
|---|
| Electronic speed controller weight | ≤12 g |
|---|
| Battery performance | Model aircraft lithium battery with performance no lower than 4S, 4200 mAh, 14.8 V; discharge rating 30C |
|---|
| Battery dimensions and weight | Dimensions ≤140 mm (L) × 45 mm (W) × 37 mm (H); weight ≤470 g |
|---|
| Flight controller construction | Carbon fiber design |
|---|
| Flight controller dimensions and weight | Dimensions ≤50 mm (L) × 55 mm (W) × 14 mm (H); weight approximately 50 g |
|---|
| Flight modes | Position hold, altitude hold, mission and return modes |
|---|
| Flight controller buzzer | Integrated buzzer; no external buzzer module required |
|---|
| Flight controller memory and power supply | Flash memory ≥8 MB; supply voltage 4.8–5.5 V |
|---|
| Remote controller signal outputs | PPM and PWM |
|---|
| Remote controller operating voltage | 7.4–18 V |
|---|
| Radio technology and channels | DSSS and FHSS hybrid dual spread-spectrum technology combining interference avoidance and resistance; 6-channel transmitter with 9-channel receiver |
|---|
| Training applications | UAV pilot vocational skills training and civil unmanned aircraft operator licence trainingA copy of the training-equipment certification bearing an official seal must be provided. |
|---|
| Additional teaching resources | UAV assembly, adjustment and flight controller demonstration videos; UAV assembly and adjustment course PowerPoint materials |
|---|
| Control and electrical equipment supplied | Remote controller, intelligent flight controller, 4S lithium-polymer battery pack, charger, 4 electronic speed controllers and flight controller power cableIncluded equipment. |
|---|
| Propulsion equipment supplied | 2 reverse-rotation and 2 forward-rotation brushless outrunner motors; 2 forward and 2 reverse propellersIncluded equipment. |
|---|
| Structural and assembly components supplied | 4 motor mounts, 4 arms, tube clamps, long and short aluminum posts, base plate, vibration-damping foam, landing gear cross braces, tee fittings, 0–90° landing gear diagonal braces, adhesive-backed hook-and-loop fasteners, long and short screws, and reverse-lock cable tiesIncluded equipment. |
|---|
| Navigation equipment supplied | GPS with built-in compassIncluded equipment. |
|---|