ChinaDroneRequest a quote →

Powerfly NF-460-M

The Powerfly NF-460-M is a multirotor UAV with fixed T-shaped landing gear for practical UAV assembly training. Carbon fiber and aviation aluminum construction combines with modular components, intelligent flight control, simulation software and teaching resources covering component testing, aircraft assembly and adjustment.

Maximum flight time
≥15 min

Get a free quote

Product overview

The Powerfly NF-460-M multirotor UAV with fixed T-shaped landing gear supports practical assembly training from component testing through complete aircraft assembly and adjustment. Its X-layout frame combines carbon fiber and aviation aluminum components with a wheelbase of at least 450 mm. The training system brings together modular UAV parts, intelligent flight control and simulation software, supported by a syllabus, practical training manual and instructional videos. Assembly and adjustment course slides and flight controller demonstration videos extend the teaching materials.

Position hold, altitude hold, mission and return-to-home modes are supported by the intelligent flight controller, which includes a built-in buzzer and at least 8 MB of flash storage. Hovering accuracy in GPS mode is ±0.5 m vertically and ±1 m horizontally. Supplied hardware includes a remote controller, 4S lithium-polymer battery pack, charger, four electronic speed controllers, four brushless outrunner motors and four propellers, together with structural parts, assembly hardware and GPS with a built-in compass.

Specifications

Powerfly NF-460-M specifications
SpecificationValue & conditions
ModelNF-460-M
Product typeMultirotor UAV with fixed T-shaped landing gear
Training system and applicationIntelligent flight control, modular UAV components, simulation software, syllabus, practical training manual and instructional videos support teaching from component testing through complete aircraft assembly and adjustment.
Frame layout and wheelbaseX layout; wheelbase ≥450 mm
Airframe materialsCarbon fiber and aviation aluminum components
Maximum flight time≥15 min
Maximum takeoff weightGreater than 1.5 kg
Operating ambient temperature-10–40°C
Hovering accuracyVertical ±0.5 m; horizontal ±1 mGPS mode
Motor threadsRight-hand and left-hand threads
Propeller specification and material≥9450; plastic
ESC current ratingsContinuous operating current ≥30 A; maximum instantaneous current ≤40 A
ESC battery compatibility and weight2–6S batteries; weight ≤12 g
Battery specificationModel-aircraft lithium battery with performance no lower than 4S 4200 mAh 14.8 V; discharge rating 30C
Battery dimensions and weight≤140 mm (L) × 45 mm (W) × 37 mm (H); weight ≤470 g
Flight controller constructionCarbon fiber design for low weight, reduced magnetic interference and improved flight controller stability
Flight controller dimensions and weight≤50 mm (L) × 55 mm (W) × 14 mm (H); approximately 50 g
Flight modesPosition hold, altitude hold, mission and return-to-home
Integrated buzzerBuilt-in buzzer eliminates the need for an external buzzer module
Flight controller memory and supply voltageFlash storage ≥8 MB; supply voltage 4.8–5.5 V
Remote controller signal outputsPPM and PWM
Remote controller operating voltage7.4–18 V
Radio technology and channelsDSSS & FHSS hybrid dual spread-spectrum technology combines interference avoidance and resistance; 6-channel remote controller with 9-channel receiver
Training requirements and certification documentationMeets equipment requirements for UAV pilot vocational skills training and civil unmanned aircraft operator licence training; a copy of the corresponding training equipment certification bearing an official seal must be provided.
Additional teaching resourcesUAV assembly, adjustment and flight controller demonstration videos, plus UAV assembly and adjustment course presentation slides
Control and power equipmentRemote controller, intelligent flight controller, 4S lithium-polymer battery pack, charger, 4 electronic speed controllers and flight controller power cableIncluded equipment
Motors and propellers2 reverse-rotation and 2 forward-rotation brushless outrunner motors; 2 forward-rotation and 2 reverse-rotation propellersIncluded equipment
Structural parts and assembly hardware4 motor mounts, 4 arms, tube clamps, long and short aluminum posts, base plate, vibration-damping foam, landing gear cross braces, tee fittings, 0–90° landing gear diagonal braces, adhesive-backed hook-and-loop fasteners, long and short screws, and reverse-lock cable tiesIncluded equipment
Navigation equipmentGPS with built-in compassIncluded equipment