ChinaDroneRequest a quote →

NXE NXE500/75-3S1P

The NXE NXE500/75-3S1P from Hebi NXE Electronic Co., Ltd. is a 500mAh, 11.4V lithium polymer battery for UAVs and FPV racing drones. This 3S pack combines 75C continuous discharge and 150C maximum discharge with a 55g weight, a JST-XHR balance charging connector and an XT60 discharge connector.

Hebi NXEDrone battery
Rated capacity
500 mAh
Rated voltage
11.4 V
Continuous discharge rate
75C
Weight
55 g
Dimensions
15.6*30*55 mm

Get a free quote

Product overview

The NXE NXE500/75-3S1P is a high-discharge-rate lithium polymer battery for UAVs and FPV racing drones, including racing and aerobatic flying. Its 3S pack provides a rated capacity of 500mAh at 11.4V, with a continuous discharge rate of 75C and a maximum discharge rate of 150C. The battery measures 15.6*30*55mm and weighs 55g. It is equipped with a JST-XHR balance charging connector and an XT60 discharge connector, with multiple discharge connector options available.

Built with lithium cobalt oxide material, the battery uses stacked cell construction, nano-coating technology and ultrasonic spot-welded electrodes. Automated production and QR-code tracking support cell matching by capacity, voltage, internal resistance and discharge curve. The battery has no memory effect and supports 300-500 recharges. Charge at 0~45°C, keeping each cell at no more than 4.25V when fully charged and no less than 2.75V at the end of discharge. During long-term storage, perform a charge-discharge cycle approximately every three months.

Batteries & charging

Specifications

NXE NXE500/75-3S1P specifications
SpecificationValue & conditions
Product typeFPV racing drone battery
BrandNXE
ModelNXE500/75-3S1P
Cathode materialLithium cobalt oxide
Battery typeHigh-discharge-rate lithium polymer battery
Continuous discharge rate75C
Maximum discharge rate150C
Rated capacity500mAh
Rated voltage11.4V
Dimensions15.6*30*55mm
Weight55g
Charging connectorJST-XHR balance charging connector
Discharge connectorXT60; multiple connector options available
ApplicationsUAVs and FPV racing drones
Cell count3S
ManufacturingManufactured on a fully automated production line
Cell constructionStacked construction, nano-coating technology and nano ultrasonic spot-welded electrodes
Cell matchingQR-code tracking supports cell matching by capacity, voltage, internal resistance and discharge curve
Recharge cycles300-500 recharges
Memory effectNo memory effect
Cell size customizationPolymer lithium cell dimensions can be customized for the customer's product
Maximum charge voltageNo more than 4.25VPer cell, fully charged.
Minimum discharge voltageNo less than 2.75VPer cell, at the end of discharge.
Charging temperature0~45°CDuring charging.
Maintenance intervalPerform a charge-discharge cycle approximately every three monthsDuring long-term non-use.

Related guides