ChinaDroneRequest a quote →

NXE NXE1800/70-4S1P

The NXE NXE1800/70-4S1P from HEBI NXE ELECTRONIC CO., LTD. is a high-rate lithium polymer battery for FPV racing drones. This 1800mAh, 14.8V, 4S pack offers a 70C continuous discharge rating and comes equipped with JST-XHR balance charging and XT60 discharge connectors.

Hebi NXEDrone battery
Rated capacity
1800 mAh
Rated voltage
14.8 V
Weight
206.4 g
Dimensions
105*34*28.5 mm
Material
Lithium cobalt oxide

Get a free quote

Product overview

The NXE NXE1800/70-4S1P supplies power for FPV racing drones and UAV applications. Its 4S lithium polymer pack combines a rated capacity of 1800mAh with a rated voltage of 14.8V. Continuous discharge is rated at 70C, with a maximum discharge rating of 140C. The battery measures 105*34*28.5mm and weighs 206.4g. It is equipped with a JST-XHR balance charging connector and an XT60 discharge connector, with additional discharge connector options available.

Lithium cobalt oxide material, stacked construction, nano-coating technology and ultrasonic electrode spot welding form the battery's construction. Automated production incorporates QR-code tracking to match cells by capacity, voltage, internal resistance and discharge curve. The battery supports 300-500 recharges and has no memory effect. Operation is at room temperature; charging requires 0–45°C. Each cell must remain at or below 4.25V when fully charged and at or above 2.75V after discharge. Cell dimensions can also be customized for the customer's product.

Batteries & charging

Specifications

NXE NXE1800/70-4S1P specifications
SpecificationValue & conditions
Product typeFPV racing drone battery
MaterialLithium cobalt oxide
BrandNXE
Continuous discharge rating70C
ModelNXE1800/70-4S1P
Maximum discharge rating140C
Rated capacity1800mAh
Operating temperatureRoom temperature
Rated voltage14.8V
Dimensions105*34*28.5mm
Charging connectorJST-XHR balance charging connector
Weight206.4g
Discharge connectorXT60; multiple connector options available
Battery technologyHigh-rate lithium polymer battery
ApplicationsUAVs and FPV racing drones
Cell configuration4S
ConstructionStacked construction, nano-coating technology and ultrasonic nanoscale electrode spot welding
ProductionFully automated production line
Cell matchingQR-code tracking system supports cell matching by capacity, voltage, internal resistance and discharge curve
Recharge cycles300-500 recharges
Memory effectNo memory effect
Cell size customizationCell dimensions can be customized to suit the customer's product
Maximum cell voltageNo more than 4.25VPer cell, fully charged.
Minimum cell voltageNo less than 2.75VPer cell, at the end of discharge.
Charging temperature0–45°CDuring charging.
Maintenance intervalPerform a charge/discharge cycle approximately every three monthsDuring long-term storage without use.

Related guides