ChinaDrone.Request a quote ↗
COMPONENT

Maytech MT30A-SBEC-FP32 Falcon Pro 32bit

By Maytech ↗

The Maytech MT30A-SBEC-FP32 Falcon Pro 32bit is a compact brushless ESC for RC aircraft and other remote-operated applications. It combines a 32-bit MCU with Maytech FP firmware, supports 2-4-cell LiPo batteries, and provides 30A continuous current, 40A burst current and a 5.5V/4A BEC. Programming-card control is optional.

Request a quote ↗
Maytech MT30A-SBEC-FP32 Falcon Pro 32bit brushless ESC with attached wires
Maytech MT30A-SBEC-FP32 Falcon Pro 32bit brushless ESC with attached wires
Manufacturer and modelMaytech MT30A-SBEC-FP32 Falcon Pro 32bit brushless ESC
ApplicationAirplane/RC Airplane/3D flying/RC Hobby Applications/sport flying/aggressive aerobatics/helicopter/racing airplane/ROV/ROVEEE/remote operated vehicle, underwater robot, Underwater Robotics/underwater remotely operated vehicles, subsea robots,cablecam, broadcast, IBC2019, Ultra drones, etc.
FirmwareMaytech FP series firmware
Continuous current30A
Burst current40A
BEC5.5V/4A

Product overview

The Maytech MT30A-SBEC-FP32 Falcon Pro 32bit is a brushless electronic speed controller intended primarily for RC airplanes, with helicopter, aerobatic and racing-aircraft applications also identified. Its architecture combines a 32-bit MCU, Maytech FP series firmware and a separate MCU voltage-regulator IC for interference resistance. The controller provides linear, quick throttle response and low-speed control. It is an electrical propulsion component for integration into a vehicle, rather than a complete flight platform or airframe kit.

For installation planning, the ESC measures 36*23.5mm and has a net weight of 20g. Its electrical configuration supports 2-4-cell LiPo batteries, 30A continuous current and 40A burst current, with a 5.5V/4A BEC. Programming is available through Trx or an optional Maytech programming card. Protection covers low voltage, blocked rotation and signal loss. Battery connection does not start the motor regardless of throttle-stick position; rotation direction can be changed by swapping two ESC wires or using the programming card.

Specifications

SpecificationValue & conditions
Manufacturer and modelMaytech MT30A-SBEC-FP32 Falcon Pro 32bit brushless ESC
ApplicationAirplane/RC Airplane/3D flying/RC Hobby Applications/sport flying/aggressive aerobatics/helicopter/racing airplane/ROV/ROVEEE/remote operated vehicle, underwater robot, Underwater Robotics/underwater remotely operated vehicles, subsea robots,cablecam, broadcast, IBC2019, Ultra drones, etc.
FirmwareMaytech FP series firmware
Continuous current30A
Burst current40A
BEC5.5V/4A
Battery cell count2-4 cellsLiPo battery.
Weight20gNet weight.
Size36*23.5mm
Controller architecture32-bit MCU
MCU power regulationSeparate voltage regulator IC for the MCU, with interference resistance.
Throttle and low-speed characteristicsStartup performance, linear throttle response, quick throttle response and low-speed performance.
Protection functionsLow-voltage, blocked-rotation and signal-loss protection.
Programming methodsProgrammable through Trx or an optional Maytech programming card.Maytech programming card is optional.
Startup behaviorThe motor does not start upon battery connection.When the battery is connected, regardless of throttle-stick position.
Motor direction adjustmentMotor rotation direction is adjustable.Exchange two of the three ESC wires or use the programming card.
SOURCE WITH CHINADRONE

Request a quote for Maytech MT30A-SBEC-FP32 Falcon Pro 32bit

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗