Product overview
The MAD M20 IPE Drone Motor is a brushless drone propulsion component, identified as MAD M20 IPE V1.0. Its electrical configuration supports 12S, with 80KV, 100KV and custom KV options. Sustained thrust is 8~10kg, while maximum thrust is 31.2kg; these are separate operating figures for propulsion sizing. The motor weighs 1031g and measures D:118 × 45.9 mm, establishing the component mass and physical envelope to accommodate within the aircraft design. The product is a motor component rather than a complete flight platform.
Mechanical integration uses D:50 M4×4 motor mounting holes and an internal shaft diameter of 15 mm. Propeller interfaces are D:20 M3x4, D:23 D4x4 and D:24 M4×4, with an adapter specified for the last pattern. Electrical connections use 150 mm extended enameled wires. The architecture incorporates 15 pole pairs, two 6902ZZ bearings, an anticorrosive stator and centrifugal heat dissipation. Protection is IP35, with separate wire and magnet temperature ratings of 220°C and 180°C. Rotor balance is ≤10 mg, and motor balance is ≤20 mg.
Specifications
| Specification | Value & conditions |
|---|---|
| Sustained thrust | 8~10kg |
| Maximum thrust | 31.2kg |
| Supported voltage | 12S |
| Weight | 1031g |
| Motor model | MAD M20 IPE V1.0 |
| Number of pole pairs | 15 |
| Stator | Anticorrosive |
| Varnished wire temperature rating | 220°C |
| Motor size | D:118 × 45.9 mm |
| Magnet temperature rating | 180°C |
| Degree of protection | IP35 |
| Cable length | 150 mmExtended enameled wires. |
| Centrifugal heat dissipation | Yes |
| Rotor balance | ≤10 mg |
| Propeller mounting holes | D:20 M3x4,D:23 D4x4, D:24 M4×4 (with adapter)D:24 M4×4 uses an adapter. |
| Motor balance | ≤20 mg |
| Shaft diameter | IN: 15 mm |
| Motor mounting holes | D:50 M4×4 |
| Bearings | 6902ZZ*2 |
| Disruptive test voltage | 500 V |
| KV options | 80KV, 100KV, custom |
Request a quote for M20 IPE Drone Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
