Product overview
The MAD M10 IPE V2.0 Angular Contact Ball Bearing Version Drone Motor is a brushless propulsion component for heavy-lift UAVs, paramotors and long-endurance flight platforms. Its intended pairing is a 24–32 inch carbon fiber propeller, with a design target of 5–6 kg single-axis payloads. It supports 12S systems and offers 90KV, 100KV, 120KV, 150KV and 180KV options. Rated thrust is 5–6 kg, while peak thrust reaches up to 17.1 kg per axis.
The motor occupies a D:118 × 34 mm envelope and incorporates an anticorrosive stator, angular contact ball bearings and centrifugal heat dissipation. Integration interfaces comprise D:23 M3×4 propeller mounting holes, D:50 M4×4 and D:76 M4×4 motor mounting patterns, and 150 mm extended enameled wires. Protection is IP35. Weight is stated as both 614g and 617g, without a configuration distinction. The separate sustained-thrust figure of 4~46kg is inconsistent with the 17.1 kg maximum; no measurement conditions explain that difference.
Specifications
| Specification | Value & conditions |
|---|---|
| Motor model | MAD M10 IPE V2.0 |
| Motor version | Angular contact ball bearing version brushless drone motor |
| Intended applications | Paramotors, heavy-lift drones and long-endurance flight platforms |
| Single-axis payload design target | 5–6 kgWith 24–32 inch carbon fiber propellers. |
| Propeller pairing | 24–32 inch carbon fiber propellers |
| Sustained thrust | 4~46kg |
| Maximum thrust | Up to 17.1 kgPer axis. |
| Rated thrust | 5–6 kg |
| Supported voltage | 12S |
| Weight | 614g |
| Additional stated design weight | 617g |
| Number of pole pairs | 15 |
| Stator | Anticorrosive |
| Varnished wire temperature rating | 220°C |
| Motor size | D:118 × 34 mm |
| Magnet temperature rating | 180°C |
| Degree of protection | IP35 |
| Cable length | 150 mmExtended enameled wires. |
| Centrifugal heat dissipation | Yes |
| Rotor balance | ≤10 mg |
| Propeller mounting holes | D:23 M3×4 |
| Motor balance | ≤20 mg |
| Shaft diameter | IN: 15 mm |
| Motor mounting holes | D:50 M4×4, D:76 M4×4 |
| Bearing | 6902ZZ / 7902CTYNSULP4 |
| Disruptive test voltage | 500 V |
| KV options | 90KV 100KV 150KV 180KV 120KV |
Request a quote for M10 IPE V2.0 Angular Contact Ball Bearing Version Drone Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
