Product overview
The MAD Antimatter M6C12 IPE V3 is a brushless motor for multirotor UAV propulsion, with a choice of 150KV, 170KV, 280KV or 400KV. Its physical construction combines an anticorrosive stator, 14 pole pairs, two 696ZZ bearings and centrifugal heat dissipation within a D:72 × 35.4 mm body. Protection is rated IP45. The varnished wire has a 180°C temperature grade and the magnets a 150°C grade. Rotor balance is ≤5 mg, while motor balance is ≤10 mg.
Installation uses a D:25 M3×4 motor mounting pattern and propeller mounting options of D:12 M3×4, 18 M3×4 and 22 M3×4. The shaft specification is IN: 6 mm, and the motor has 150 mm black 16# AWG silicone leads. Allow installation clearance according to the motor drawing and check both mounting interfaces. Each selected KV version requires a suitable battery voltage, ESC and propeller; thrust and current assessment depends on that exact combination, and KV alone does not determine payload capacity or flight time.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and product | MAD Antimatter M6C12 IPE V3 Brushless Drone Motor |
| Motor model designation | MAD M6C12 IPE V3.0 |
| Product purpose | Brushless motor for multirotor UAV propulsion |
| Available KV options | 150KV, 170KV, 280KV, 400KV |
| Motor dimensions | D:72 × 35.4 mm |
| Protection rating | IP45 |
| Motor leads | 150 mm 16# Awg(Black) silicone |
| Number of pole pairs | 14 |
| Stator treatment | Anticorrosive |
| Varnished wire temperature grade | 180°C |
| Magnet temperature grade | 150°C |
| Centrifugal heat dissipation | Yes |
| Rotor balance | ≤5 mg |
| Propeller mounting holes | D:12 M3×4, 18 M3×4, 22 M3×4 |
| Motor balance | ≤10 mg |
| Shaft diameter | IN: 6 mm |
| Motor mounting holes | D:25 M3×4 |
| Bearings | 696ZZ *2 |
| Disruptive test voltage | 500 V |
| Propulsion matching and performance limitations | Match battery voltage, ESC and propeller to the selected KV version. Assess thrust and current for that exact combination; KV alone does not determine payload capacity or flight time.Selected KV version with a suitable battery voltage, ESC and propeller. |
| Installation clearance | Check the motor drawing for installation clearance. |
| Mounting requirements | Check motor and propeller mounting patterns before installation. |
Request a quote for Antimatter M6C12 IPE V3 Brushless Drone Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
