Product overview
The MAD 4006 EEE Drone Motor 320KV/380KV/740KV is a propulsion component for drone integration, with the motor data identifying the hardware as MAD 4006 EEE V1.0. Its intended applications span professional cinematography, industrial inspection, hybrid cinewhoop builds and agricultural monitoring. Listed payload examples include Red Komodo and Sony FX3 cameras, LiDAR and thermal imaging systems, and multispectral sensor arrays. Procurement options comprise three KV variants—320KV, 380KV and 740KV—and packs containing either one or two motors.
Each motor weighs 72g and measures D:44.5 × 24.1 mm, defining the component envelope for installation. Its architecture combines 12 pole pairs, an anticorrosive stator, two NSK 694ZZMC3 bearings and centrifugal heat dissipation. Integration interfaces include D:12 M3×4 propeller mounting holes, D:19 M3×4 and D:25 M3×4 motor mounting holes, and an internal shaft diameter of 4 mm. The motor cable is 150 mm long and uses black silicone 18# AWG wire. Compatible propellers are 13–16-inch carbon fiber types.
The motor is optimized for 6S–8S LiPo systems and uses a low-RPM, high-torque design intended to support extended flight times. Its listed payload capacity is 550–1100g per rotor, with maximum thrust of 2200g (2.2kg) per motor and a thrust-to-weight ratio of 30.5:1. Independent rotor balance is ≤5 mg, while motor balance is ≤10 mg. Protection is specified as rain protection; the varnished wire and magnets each have a 150°C rating. These are component specifications for integration into a drone propulsion system.
Specifications
| Specification | Value & conditions |
|---|---|
| Motor model | MAD 4006 EEE V1.0 |
| KV options | 320KV; 380KV; 740KV |
| Packing options | 1pc; 2pcs |
| Payload capacity | 550–1100g per rotorPer rotor. |
| Propeller compatibility | 13–16 inchesCarbon fiber propellers. |
| Maximum thrust | 2200g (2.2kg) per motorPer motor. |
| Motor weight | 72g per unitPer unit. |
| Thrust-to-weight ratio | 30.5:1 |
| Power system optimization | 6S–8S LiPoLiPo systems. |
| Motor operating design | Low-RPM, high-torque design |
| Vibration reduction | Less than 5mgPrecision-balanced rotor. |
| Pole pairs | 12 |
| Stator treatment | Anticorrosive |
| Varnished wire temperature rating | 150°CVarnished wire. |
| Motor size | D:44.5 × 24.1 mm |
| Magnet temperature rating | 150°CMagnet. |
| Protection | Rain protection |
| Motor cable | 150 mm; 18# AWG; black silicone |
| Heat dissipation | Centrifugal heat dissipation |
| Independent rotor balance | ≤5 mg |
| Propeller mounting holes | D:12 M3×4 |
| Motor balance | ≤10 mg |
| Shaft diameter | IN: 4 mmInternal shaft dimension. |
| Motor mounting holes | D:19 M3×4; D:25 M3×4 |
| Bearings | NSK 694ZZMC3 ×2 |
| Disruptive test voltage | 500 V |
| Intended applications | Professional cinematography drones; industrial inspection platforms; advanced FPV racing and hybrid cinewhoop builds; agricultural monitoring |
Request a quote for 4006 EEE Drone Motor 320KV/380KV/740KV
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
