ChinaDroneRequest a quote →

Levane Power HLF72K-D120-2000

The Levane Power HLF72K-D120-2000 is an airborne isolated DC-DC step-down converter for heavy-lift tethered UAV systems. It converts ground-supplied high-voltage DC for airborne loads supporting communications, firefighting, illumination and surveillance. Reinforced construction, temperature-controlled cooling and CAN monitoring support integration into demanding aerial platforms.

Levane PowerDrone battery
Weight
≤ 30 kg
Dimensions
600 mm × 251 mm × 130 mm
Ingress protection
IP65

Get a free quote

Product overview

Designed for heavy-lift, long-endurance tethered UAV systems, the Levane Power HLF72K-D120-2000 connects ground-based high-voltage DC power to airborne electrical loads. Applications include emergency communications relays, firefighting pumps, rescue lighting, surveillance payloads and event communications. Its continuous input range is 1500–2000 Vdc. Conversion efficiency is ≥97%, typically at 50%–100% load, while dynamic response takes less than 300 μs for a 25%–75% load step. Multiphase interleaved parallel circuitry and synchronous rectification form the power conversion architecture.

The converter combines a mechanically reinforced, locally potted PCB with vibration isolation pads and a conformal-coated main circuit board. Its IP65 housing measures 600 × 251 × 130 mm, and weight is ≤30 kg. Temperature-controlled fans provide forced-air cooling; housing operating temperature spans -40°C to +55°C. CAN 2.0B supports remote monitoring, parameter configuration and firmware updates. Electrical interface definitions, mounting dimensions and complete CAN protocol documentation are supplied for integration, with technical support covering system design, electrical integration and on-site commissioning.

Batteries & charging

Specifications

Levane Power HLF72K-D120-2000 specifications
SpecificationValue & conditions
ModelLevane Power HLF72K-D120-2000
Product typeAirborne isolated DC-DC step-down converter
Rated input voltage2000 VdcNominal value.
Input voltage range1500–2000 VdcContinuous operating range; customizable.
Maximum input current35 AAt 2000 V input.
Input reverse-polarity protectionSupported
Voltage adjustment range±5% of the rated valueAdjusted through CAN commands.
Output ripple and noiseLess than 1.8 VppMeasured with 20 MHz bandwidth.
Conversion efficiency≥ 97%Typical value at 50%–100% load.
Power density≈ 1.43 KW/dm³
Standby power consumptionLess than 10 WInput enabled, output unloaded.
Dynamic response timeLess than 300 μs25%–75% load step.
Input undervoltage protection threshold1450 VdcConfigurable default threshold; automatic recovery.
Input overvoltage protection threshold2050 VdcConfigurable default threshold; automatic recovery.
Output overcurrent protection110%–115% of rated currentConfigurable; hiccup mode.
Overtemperature protectionAlarm and full fan speed at 65°C; derating at 75°C; shutdown at 85°CBaseplate temperature.
Communication interfaceCAN 2.0B; 250 kbps, 500 kbps or 1 MbpsSelectable baud rate.
Digital I/OOne enable input and one fault indication outputOptically isolated.
Dimensions600 mm × 251 mm × 130 mmLength × width × height.
Weight≤ 30 kg
CoolingForced-air cooling with temperature-controlled variable-speed fans
Operating temperature-40°C to +55°CHousing temperature.
Storage temperature-55°C to +105°C
Ingress protectionIP65
Vibration resistanceMeets vibration test requirements for UAV airborne equipment
Mean time between failuresGreater than 100,000 hoursCalculated according to MIL-HDBK-217F.
Design lifeGreater than 10 years
Warranty24 monthsFrom factory shipment.
Integration documentation suppliedElectrical interface definitions, mechanical mounting dimensions and complete CAN communication protocol documentation
ConstructionPCB with multipoint mechanical reinforcement and localized potting, combined with high-damping vibration isolation pads

Related guides