ChinaDroneRequest a quote →

Levane Power HLF60K-D120-2000

The Levane Power HLF60K-D120-2000 is an airborne isolated DC-DC step-down converter for heavy-lift tethered UAVs. It accepts 1200–1500 Vdc and delivers 60 kW at ambient temperatures up to 50°C. Forced-air cooling, CAN communication and integrated electrical protection support applications including emergency communications, firefighting and rescue lighting.

Levane PowerDrone battery
Weight
≤ 10 kg
Dimensions
400 mm × 251 mm × 130 mm
Ingress protection
IP65

Get a free quote

Product overview

The Levane Power HLF60K-D120-2000 converts high-voltage DC from a ground generator or DC bus into low-voltage power for heavy-lift, long-endurance tethered UAV systems. Its continuous input range is 1200–1500 Vdc, with rated output power of 60,000 W at ambient temperatures up to 50°C. Applications include emergency communications relays, firefighting pumps, rescue lighting and aerial monitoring. The converter uses a multiphase interleaved parallel architecture with synchronous rectification to support the electrical demands of airborne equipment.

The 400 × 251 × 130 mm unit weighs no more than 10 kg and combines reinforced, locally potted circuit boards with vibration-isolation pads, conformal coating and an IP65 enclosure. Temperature-controlled fans provide forced-air cooling, with thermal protection progressing through warning, derating and shutdown. CAN 2.0B supports monitoring, remote parameter configuration and firmware updates. Electrical interface definitions, mounting dimensions and complete CAN protocol documentation are supplied, alongside integration support and a 24-month warranty from factory shipment.

Batteries & charging

Specifications

Levane Power HLF60K-D120-2000 specifications
SpecificationValue & conditions
Product typeAirborne isolated DC-DC step-down converter
Rated input voltage1500 VdcNominal value.
Input voltage range1200 - 1500 VdcContinuous operating range; customization available.
Maximum input current50 AAt 1200V input.
Input reverse-polarity protectionSupported
Voltage adjustment range±5%Relative to the rated value; adjustable through CAN commands.
Rated output power60,000 W (60 KW)Ambient temperature ≤50°C.
Output ripple and noiseLess than 1.8 VppMeasured with 20MHz bandwidth.
Power density≈ 1.43 KW/dm³
Standby power consumptionLess than 10 WInput enabled; output unloaded.
Dynamic response timeLess than 300 μs25%-75% load step.
Input undervoltage protection threshold1150 VdcConfigurable default threshold; automatic recovery.
Input overvoltage protection threshold1550 VdcConfigurable default threshold; automatic recovery.
Output overcurrent protection110%-150% of rated currentConfigurable; hiccup mode.
Overtemperature protectionAlarm and full fan speed at 85°C; derating at 95°C; shutdown at 100°C85°C threshold measured at the baseplate.
Communication interfaceCAN 2.0B; 250kbps/500kbps/1MbpsSelectable baud rates.
Digital I/O1 enable input; 1 fault indication outputOptically isolated.
Dimensions400 mm × 251 mm × 130 mmLength × width × height.
Weight≤ 10 kg
CoolingForced-air cooling with temperature-controlled variable-speed fans
Operating temperature-40°C to +85°CHousing temperature.
Storage temperature-55°C to +105°C
Ingress protectionIP65
Vibration resistanceMeets vibration test requirements for UAV airborne equipment
Mean time between failuresGreater than 100,000 hoursCalculated value based on MIL-HDBK-217F.
Design lifeGreater than 10 years
Power conversion architectureMultiphase interleaved parallel topology with synchronous rectification
PCB constructionMultipoint mechanical reinforcement, localized potting and high-damping vibration-isolation pads
Integration documentation suppliedElectrical interface definitions, mechanical mounting dimensions and complete CAN communication protocol documentation
Warranty period24 monthsFrom factory shipment.

Related guides