ChinaDroneRequest a quote →

Levane Power HLF3K-D50-750

The Levane Power HLF3K-D50-750 is a 3,000 W airborne isolated DC-DC step-down converter for heavy industrial UAVs and eVTOL aircraft. It converts 680–750 Vdc battery input to an adjustable 50 Vdc, 60 A output for onboard electronics and mission payloads, combining ≥97% conversion efficiency with a weight of ≤0.85 kg.

Levane PowerDrone battery
Weight
≤ 0.85 kg
Ingress protection
IP67

Get a free quote

Product overview

The Levane Power HLF3K-D50-750 converts high-voltage battery power into a low-voltage supply for heavy industrial UAVs and eVTOL aircraft. Its 680–750 Vdc input feeds an adjustable 50 Vdc output rated at 60 A and 3,000 W. Applications include flight controls, electro-optical gimbals, lidar, communications relay equipment and servo motors. Conversion efficiency is ≥97%, with typical peak efficiency above 97.5%. Output ripple and noise remain below 100 mVpp when measured with a 20 MHz bandwidth.

Built with aviation-grade materials, an optimized topology, soft switching and synchronous rectification, the converter weighs ≤0.85 kg. Reinforced critical circuits, selective potting and vibration-damping pad mounting support airborne installation. Cooling uses conduction or forced air according to installation, and the operating case-temperature range is -40°C to +85°C. Integrated protections include soft start, input undervoltage and overvoltage protection, and output overcurrent and short-circuit protection. Baseplate temperature triggers a warning at 85°C and derating at 95°C. CAN 2.0B provides operating telemetry and fault reporting; IP67 protection is optional.

Batteries & charging

Specifications

Levane Power HLF3K-D50-750 specifications
SpecificationValue & conditions
ModelHLF3K-D50-750
Product typeAirborne isolated DC-DC step-down converter
Input voltage range680–750 Vdc
Maximum input current4.41 AAt 680 V input.
Rated output voltage50 VdcAdjustable output.
Rated output power3,000 W (3 KW)
Rated output current60 A
Output ripple and noiseLess than 100 mVppMeasured with 20 MHz bandwidth.
Conversion efficiency≥ 97%
Peak conversion efficiencyGreater than 97.5%Typical peak efficiency.
Weight≤ 0.85 kg
Standby power consumptionLess than 5 WStandby operation.
Input undervoltage protectionLess than 660 VdcConfigurable threshold; automatic recovery.
Input overvoltage protectionGreater than 770 VdcConfigurable threshold; automatic recovery.
Output overcurrent and short-circuit protection110%–150% of rated currentRelative to rated output current; hiccup mode.
Overtemperature protectionWarning at 85°C; derating at 95°CBaseplate temperature.
Communication interfaceCAN 2.0BConfigurable baud rate.
CoolingConduction cooling / forced-air coolingCooling method depends on installation.
Operating temperature-40°C to +85°CCase temperature.
Ingress protectionIP67Optional ingress protection configuration.
Vibration resistanceComplies with aviation vibration standards including RTCA DO-160G
Materials and power topologyAviation-grade materials and an optimized topology
Conversion technologySoft switching and synchronous rectification
Vibration-resistant constructionReinforced critical circuits, selective potting and mounting with high-elasticity vibration-damping pads
Soft startIntegrated soft-start function
TelemetryReal-time reporting of input and output voltage and current, internal temperature, operating status and fault codesVia CAN 2.0B communication.
Supported monitoring functionsPrognostics and health management (PHM) and remote monitoring from a ground station
Applications and powered equipmentDesigned for heavy industrial UAVs and eVTOL aircraft; supplies flight controls, electro-optical gimbals, lidar, communications relay equipment, servo motors and other airborne electronics

Related guides