ChinaDroneRequest a quote →

Levane Power HLF3K-D50-1000

The Levane Power HLF3K-D50-1000 is a 3 kW airborne isolated DC-DC step-down converter for high-voltage UAV and advanced air mobility platforms. It converts 800–1000 Vdc input to 50 Vdc at 60 A, combining a weight of ≤0.85 kg with integrated electrical protection, thermal management and CAN communication.

Levane PowerDrone battery
Weight
≤ 0.85 kg

Get a free quote

Product overview

The Levane Power HLF3K-D50-1000 supplies onboard equipment in heavy-lift UAVs and advanced air mobility aircraft using kilovolt-class electrical platforms. It converts 800–1000 Vdc battery power to a software-adjustable nominal 50 Vdc output, rated at 3,000 W and 60 A. Applications include flight-control computers, lidar, synthetic-aperture radar, high-performance computing units, servo drives and avionics. Typical conversion efficiency is ≥97% from half load to full load, while output ripple and noise remain below 100 mVpp when measured with 20 MHz bandwidth.

Construction combines aviation-grade aluminum, high-performance composites and three-dimensional packaging, with fully potted key modules and multipoint vibration-damping mounts. The converter weighs ≤0.85 kg and uses conduction cooling with support for a forced-air cooling interface. Its IP67 protection accompanies a case operating temperature range of -40°C to +85°C. Integrated protection covers input undervoltage and overvoltage, output overcurrent and short circuits, overtemperature and surges. CAN 2.0B communication is standard, CAN FD is optional, and custom adaptation supports AFDX avionics integration.

Batteries & charging

Specifications

Levane Power HLF3K-D50-1000 specifications
SpecificationValue & conditions
ModelHLF3K-D50-1000
Product typeAirborne isolated DC-DC step-down converter with high-voltage input
Input voltage range800 - 1000 VdcFor kilovolt platforms.
Maximum input current3.75 AAt 800 V input.
Rated output voltage50 VdcFine adjustment through software.
Rated output power3,000 W (3 KW)
Rated output current60 A
Output ripple and noiseLess than 100 mVppMeasured with 20 MHz bandwidth.
Conversion efficiency≥ 97%Typical value from half load to full load.
Weight≤ 0.85 kg
Standby power consumptionLess than 5 W
Input undervoltage protectionLess than 780 VdcConfigurable threshold; selectable latching or automatic recovery.
Input overvoltage protectionGreater than 1050 VdcConfigurable threshold; selectable latching or automatic recovery.
Output overcurrent and short-circuit protection110% - 200% of rated currentRelative to rated current; multistage hiccup mode.
Overtemperature protectionWarning and increased cooling at 85°C; derating at 100°C; shutdown at 110°CBaseplate temperature.
Communication interfaceCAN 2.0B / CAN FDCAN 2.0B is standard; CAN FD is optional.
CoolingHigh-efficiency conduction cooling with support for a forced-air cooling interface
Operating temperature-40°C to +85°CCase temperature.
Protection ratingIP67; meets dust, water and salt-fog protection requirements
Vibration and shock complianceRTCA DO-160G Section 8 (vibration) and Section 7 (shock)
ConstructionAviation-grade aluminum, high-performance composite materials and three-dimensional packaging
Module mountingFully potted key modules with multipoint vibration-damping mounts
Thermal managementMultilevel temperature monitoring and adaptive cooling
Additional electrical protectionSurge protection, fault isolation and automatic recovery
Additional avionics bus supportAFDX and other avionics busesCustom adaptation.
Applications and powered equipmentPower for flight-control computers, lidar, synthetic-aperture radar, high-performance computing units, servo drives and avionics
Aircraft applicationsHeavy-lift UAVs and advanced air mobility aircraft using kilovolt-class high-voltage platforms

Related guides