ChinaDrone.Request a quote ↗
COMPONENT

Kpower MM0120 12G Half-Aluminium Housing Metal Gear Brushed Micro Servo

By Kpower ↗

The Kpower MM0120 is a compact brushed micro servo for drone, RC and other motion-control applications. It combines metal gears, a plastic and aluminum alloy housing, potentiometer sensing and PWM control. Its specified weight is 14g, with a 3.7-6V supply range; position feedback and stall protection are optional.

Request a quote ↗
Manufacturer and modelKpower MM0120 12G Half-Aluminium Housing Metal Gear Brushed Micro Servo
ApplicationsRC model aircraft, smart grippers, fishing bait boats and medical devices
Stall torque3.5kg·cm6 V
No-load speed0.1sec/60°6 V; no load
Travel angle180°Customization supported.
Voltage range3.7-6V

Product overview

The Kpower MM0120 12G Half-Aluminium Housing Metal Gear Brushed Micro Servo is a compact actuator for drone and RC installations, with additional applications in smart grippers, fishing bait boats and medical devices. Its architecture combines a DC brushed motor, metal gears, a plastic and aluminum alloy case, a potentiometer position sensor and a 1BB bearing specification. The body measures 23x12x27mm and uses a 20T spline with a Φ4.82mm diameter. Although the model name includes 12G, the specified product weight is 14g (0.49oz).

Integration requires a 3.7-6V supply and PWM control, with digital and analog PWM communication supported. At 6 V, the servo specifies 3.5kg·cm stall torque, 0.1sec/60° no-load speed and 1200 mA stall current; these figures describe distinct operating conditions. Travel is 180°, with customization supported for travel, signal/protocol and ingress protection. The listed protection rating is IP42, and the operating temperature range is -10~50°C. Position feedback and stall protection are optional features, so they should be specified when selecting the required configuration.

Specifications

SpecificationValue & conditions
Manufacturer and modelKpower MM0120 12G Half-Aluminium Housing Metal Gear Brushed Micro Servo
ApplicationsRC model aircraft, smart grippers, fishing bait boats and medical devices
Stall torque3.5kg·cm6 V
No-load speed0.1sec/60°6 V; no load
Travel angle180°Customization supported.
Voltage range3.7-6V
Dimensions23x12x27mm
Weight14g (0.49oz)
Stall current1200 mA6 V; stalled
Case materialPlastics + aluminum alloy
Gear materialMetal
Spline20T Φ4.82mm
MotorDC brushed motor
Bearing1BB
Position sensorPotentiometer
Signal and protocolPWMCustomization supported.
PWM communication supportDigital and analog PWM communication
Ingress protectionIP42Customization supported.
Operating temperature-10~50°C
Potentiometer featureLong-life potentiometer
Position feedback and stall protectionOptional position feedback and stall protectionOptional equipment.
SOURCE WITH CHINADRONE

Request a quote for Kpower MM0120 12G Half-Aluminium Housing Metal Gear Brushed Micro Servo

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
DYS D800-V6 hexacopter airframe with six propellers and landing gear
Propellers & airframes

D800-V6

By DYS

The DYS D800-V6 is a heavy-lift UAV platform with an 800 mm wheelbase, quick-disconnect construction and retractable landing gear. Its configuration specifies motors, ESCs and carbon-fiber propellers, with 6S LiPo power. Take-off weight ranges from 4–10 kg; the 20-minute hovering figure applies at 7 kg with a 15000 mAh battery.

ABASS R-B16 digital servo with black and red housing and a metal output shaft
Propellers & airframes

ABASS R-B16

By ABASS Precision Drive

The ABASS R-B16 is a digital servo for consumer UAVs, model aircraft, robots and other equipment. It combines a coreless motor, all-metal gears and an aluminum-alloy housing, measuring 40.5*15*34mm and weighing 56g. Specifications cover three operating voltages, with corresponding no-load speeds and stall torques.

Propellers & airframes

Kpower HB2032 32kg All Metal Low Servo

By Kpower

The Kpower HB2032 32kg All Metal Low Servo is a compact actuator for RC model aircraft and other mechanisms. It combines a brushless motor, steel gears and an aluminum-alloy case in a 40.8x20.2x25.5mm body. Its specified configuration includes PWM control, 180° travel, 32kg·cm stall torque and a 4.8-8.4V voltage range.

SkyRC FX180 carbon fiber racing frame with green and red illuminated motor protectors
Propellers & airframes

SkyRC FX180

By SKYRC

The SkyRC FX180 is a carbon fiber FPV racing frame with a lower battery position, adjustable camera mounting and illuminated motor protection. A pre-installed XT60 connector and multifunction power hub support electrical integration. Its listed build configuration covers propulsion, flight control, two battery options and propeller choices.