Product overview
The Kpower HC1007 is a compact motion-control servo for applications including fixed-wing drones, vertical take-off and landing drones, robot joints, intelligent grippers and medical equipment. Its physical architecture combines a coreless motor, hardened heat-treated metal gears and a high-strength 6061 aluminium alloy body. Dual output shaft ball bearing support accompanies the 2BB bearing specification. The 40.5x20x25mm enclosure weighs 55g, with a 25mm profile described as 30% lower than standard servos delivering equivalent torque.
The specified configuration uses potentiometer position sensing, PWM control and a 25T Φ5.88mm spline. Travel is 180°, with customization supported for travel and signal/protocol. Electrical integration requires a 4.8-7.4V supply; at 7.4V, stall torque is 12kg·cm, no-load speed is 0.12sec/60° and stall current is 3500mA. Motion characteristics include backlash below 0.5°, a 3μs dead zone and millisecond-level dynamic response. The operating envelope includes an IP42 protection rating and a temperature range of -10 to 50°C.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | Kpower HC1007 low-profile metal-gear coreless servo |
| Applications | Robot joints, fixed-wing drones, vertical take-off and landing drones, intelligent grippers and medical equipment |
| Height reduction | 30% lower heightCompared with standard servos with equivalent torque. |
| Backlash | Less than 0.5° with machined metal gears |
| Dead zone | 3μs |
| Dynamic response | Millisecond-level |
| Shaft support | Dual output shaft ball bearing support |
| Gear treatment | Hardened, heat-treated metal gears |
| Body construction | High-strength 6061 aluminium alloy |
| Stall torque | 12kg·cmAt 7.4V. |
| No-load speed | 0.12sec/60°At 7.4V, no load. |
| Travel angle | 180°Customization supported. |
| Voltage range | 4.8-7.4V |
| Dimensions | 40.5x20x25mm |
| Weight | 55g |
| Stall current | 3500mAAt 7.4V, stalled. |
| Case material | Aluminum alloy |
| Gear material | Metal |
| Spline | 25T Φ5.88mm |
| Motor | Coreless motor |
| Bearing | 2BB |
| Position sensor | Potentiometer |
| Signal and protocol | PWMCustomization supported. |
| Ingress protection | IP42 |
| Operating temperature | -10～50°C |
Request a quote for Kpower HC1007 12kg Low-Profile Metal Gear Hollow Cup Servo
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
