Product overview
The Kpower HB1106 combines a brushless motor, hardened and heat-treated metal gears, potentiometer position sensing and a high-strength 6061 aluminum alloy body. Its output shaft uses dual ball-bearing support, with a 2BB bearing configuration. Intended applications include fixed-wing and vertical take-off and landing drones, robot joints, intelligent grippers and medical equipment. This is a servo component for integration into a larger mechanism; its stated configuration includes PWM control and a 25T, Φ5.9mm output spline.
Installation dimensions are 40x20x25mm and weight is 55g (1.94oz). A separate design description specifies a 28mm low profile and a height reduction of 30% against standard servos with equivalent torque. Operation requires 4.8–7.4V; at 7.4V, stall torque is 12kg·cm, no-load speed is 0.12sec/60° and stall current is 4000mA. Travel is 180°, with customization supported for travel, signal/protocol and ingress protection. The specified protection rating is IP42, and the operating temperature range is -10 to 50°C.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | Kpower HB1106 10kg Low-Profile Metal Gear Brushless Servo |
| Applications | Robot joints, fixed-wing drones, vertical take-off and landing drones, intelligent grippers and medical equipment |
| Low-profile design | 28mm low-profile design; 30% lower height than standard servos with equivalent torque |
| Gear backlash | Less than 0.5° |
| Deadband | 3μs |
| Output support and body construction | Dual output shaft ball bearing support; high-strength 6061 aluminum alloy body |
| Gear treatment | Hardened, heat-treated metal gears |
| Low-temperature protection | -10°C low-temperature protection |
| Chassis compatibility | Compatible with 1/10 drift short-body chassisWith 25T standard output spline. |
| Stall torque | 12kg·cmAt 7.4V. |
| No-load speed | 0.12sec/60°At 7.4V; no load. |
| Travel angle | 180°Customization supported. |
| Voltage range | 4.8-7.4V |
| Dimensions | 40x20x25mm |
| Weight | 55g (1.94oz) |
| Stall current | 4000mAAt 7.4V; stalled. |
| Case material | Aluminum alloy |
| Gear material | Metal |
| Output spline | 25T Φ5.9mm |
| Motor | Brushless |
| Bearing configuration | 2BB |
| Position sensor | Potentiometer |
| Signal and protocol | PWMCustomization supported. |
| Ingress protection | IP42Customization supported. |
| Operating temperature | -10 to 50°C |
Request a quote for Kpower HB1106 10kg Low-Profile Metal Gear Brushless Servo
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
