Product overview
The JIUSI F13 is a 13-inch FPV flight platform for remotely piloted flight with onboard video and payload carrying capability. Its propulsion configuration combines 4214-600KV motors with HQProp 13X9X3 V2 propellers, supported by a motor-base structure designed for heat dissipation. Payload capacity is 5 kg, flight altitude is 2,000 m, flight distance is 20 km and flight speed is 140 km/h. The 25-minute endurance applies to unloaded flight. The F405 80A ESC flight stack has separately specified continuous and momentary currents of 55 A and 65 A, with voltage, current, ESC temperature and motor-speed telemetry.
The video configuration pairs a PandaRC VT5804-BAT transmitter with a CADDXFPV Ratel2 camera featuring a 1/1.8-inch sensor. The video link reaches 8 km, while transmitter output is adjustable from 0 to 2.5 W. Two mounting-hole patterns provide options for fitting the transmitter into a frame. Built-in power self-check and startup frequency locking support video-system operation. Control uses a Radiomaster TX12 with integrated ExpressLRS, an STM32F407 processor and USB-C charging with QC3.0 support. Its Hall-effect sticks allow travel adjustment without opening the case; EdgeTX is installed by default, and OpenTX is also supported.
Specifications
| Specification | Value & conditions |
|---|---|
| Product type | F13 13-inch FPV UAV |
| Payload capacity | 5 kg |
| Video transmission distance | 8 km |
| Flight altitude | 2,000 m |
| Flight distance | 20 km |
| Flight speed | 140 km/h |
| Endurance | 25 minutesUnloaded flight. |
| Motor | 4214-600KV |
| Motor base | Structure designed for base heat dissipation |
| Flight stack | F405 80A ESC flight stack |
| Continuous current | 55 A |
| Momentary current | 65 AMomentary current. |
| ESC telemetry | Voltage, current, ESC temperature and motor speed feedback |
| Propellers | HQProp 13X9X3 V2 |
| Video transmitter | PandaRC VT5804-BAT |
| Video transmitter diagnostics | Built-in power self-check |
| Video frequency lock | Frequency lock to avoid interference with other users at startupAt power-on. |
| Video transmitter mounting holes | 30.5 × 30.5 and 20 × 20 |
| Video transmitter output power | Adjustable from 0 to 2.5 W |
| Camera | CADDXFPV Ratel2 |
| Camera sensor | 1/1.8-inch |
| Remote controller | Radiomaster TX12 |
| Controller radio module | Built-in ExpressLRS module |
| Controller processor | STM32F407 |
| Controller charging | USB-C interface with QC3.0 fast charging support |
| Controller sticks | Hall-effect sticks with travel adjustment without opening the case |
| Controller operating systems | Supports EdgeTX and OpenTXEdgeTX installed by default. |
| Controller rear grip | Upgraded rear grip for a firmer hold |
| Controller side sliders | Upgraded S1 and S2 side sliders for easier operation |
| Controller storage | Built-in SD card |
