Product overview
The iFlight Taurus X8 Pro Max V2 is a cinema FPV drone built for professional camera and gimbal work. Its quick-change gimbal system supports upper and lower mounting positions, while the body accommodates a handheld gimbal and camera combination. A maximum payload of 4.5kg supports equipment such as Sony FX6 and RED Komodo cinema cameras with shooting gimbals, without additional modification. The lowered body structure reduces the flight centre of gravity, and a dual-battery quick-release plate provides push-and-latch battery retention.
Eight XING2 3616 760KV motors drive 11-inch propellers on a 610mm wheelbase. Maximum speed is 170km/h, with level 8 wind resistance. Unloaded hovering requires 30% throttle and offers approximately 25 minutes of endurance; loaded cruise endurance is approximately 13 minutes. The battery configuration uses two Fullsend LR series 21700 8S XT90 10000mAh packs. BLITZ H7 Pro flight control and eight BLITZ E80 electronic speed controllers accompany a revised power-distribution layout that reduces loose wiring. The electronics feature plug connections and shielding covers on both sides.
A physically switched dual-voltage BEC provides 12V for most video transmitters and peripherals, plus some cameras, or 15V for higher-voltage cinema cameras such as Sony FX6 and RED Komodo. Type-C and XT30 ports supply cameras and gimbals. Separate controls operate aircraft power, camera power, voltage selection and welcome lighting. A continuous rear light helps identify the aircraft during night shoots. The foldable upright dual-band receiver antenna and adjustable, laterally folding GPS bracket support compact storage, and a dedicated storage case is supplied as standard.