ChinaDroneRequest a quote →

iFlight Smart Smoke Stopper XT60 to XT30

The iFlight Smart Smoke Stopper XT60 to XT30 is a current-limiting tool for initial mini quad drone power-on and electrical troubleshooting. It features XT30 and XT60 input and output connectors, accepts 2-8S input, and provides a green LED for normal operation plus audible fault indication. One smoke stopper is included.

iFlightDrone battery
Input voltage
2-8S

Get a free quote

Product overview

The iFlight Smart Smoke Stopper XT60 to XT30 helps protect mini quad drone electronics during first power-on. By limiting current flow when a defective component or short circuit is present, it helps prevent damage from current surges and allows troubleshooting before components burn out. Its LED stays solid green during normal operation; under abnormal conditions, the LED turns off and an audible beep provides a fault indication.

The unit measures 42 x 32 x 11 mm and provides XT30 and XT60 connectors for both input and output. It accepts a 2-8S input, with a hold current of 0.7A and a trip current of 1.2A. Each package includes one iFlight XT30/XT60 Smoke Stopper. It does not protect against all wiring errors; check wiring with a multimeter before applying voltage.

Batteries & charging

Specifications

iFlight Smart Smoke Stopper XT60 to XT30 specifications
SpecificationValue & conditions
ProductIFlight Smart Smoke Stopper XT60 to XT30
FunctionHelps avoid damage during initial power-on.When powering on a mini quad drone for the first time.
Current limitingLimits current flow to help protect electronic components.With a defective part or short circuit.
Normal status indicationSolid green LED.Normal operation.
Fault indicationLED turns off and audible beeping starts.Abnormal operation.
Dimensions (L × W × H)42 x 32 x 11 mm
ConnectorsXT30 & XT60Input and output.
Hold current0.7A
Trip current1.2A
Input voltage2-8S
Package contents1 × iFlight XT30/XT60 Smoke Stopper.Included equipment.
Protection limitation and electrical checkDoes not protect against all wiring errors; check wiring with a multimeter before applying voltage.Before applying voltage.

Related guides