| Product and application | IFlight Nazgul Evoque F5 V3 FPV drone. |
|---|
| Intended uses | Freestyle flying and filming. |
|---|
| Frame configuration | DC configuration by default; convertible to true X configuration. |
|---|
| Motor diagonal distance | 236mm in DC configuration; 239mm in true X configuration.DC configuration; true X configuration. |
|---|
| Dimensions, L × W × H | 230 × 207 × 54mm in DC configuration; 207 × 199 × 54mm in true X configuration.DC configuration; true X configuration. |
|---|
| Flight stack | Borg Mini F7 FC + Borg Mini 60 ESC. |
|---|
| Video transmission module | DJI O4 Air Unit Pro. |
|---|
| Motors | XING2 2207 1750KV. |
|---|
| Propellers | Nazgul F5. |
|---|
| Weight | 492±5g.Including propellers, nuts, antennas and anti-slip pad. |
|---|
| Hover endurance | Approximately 12–13 minutes.With a Fullsend FPV series 1480mAh 150C battery under iFlight laboratory conditions. |
|---|
| Hover throttle | 22%–23%.With a Fullsend FPV series 1480mAh 150C battery under iFlight laboratory conditions. |
|---|
| Maximum horizontal flight speed | 190km/h.With a Fullsend FPV series 1480mAh 150C battery under iFlight laboratory conditions. |
|---|
| Performance measurement configuration | Speed, hover endurance and hover throttle measurements use a Fullsend FPV series 1480mAh 150C battery under iFlight laboratory conditions. |
|---|
| GPS | Optional. |
|---|
| Recommended batteries | 6S 1480mAh or 6S 1550mAh battery. |
|---|
| Recommended payload | 200g. |
|---|
| Power protection and capacitors | Onboard anti-spark protection suppresses voltage spikes; onboard polymer capacitors require no external capacitor. |
|---|
| Independent BEC outputs | Two independent BEC circuits: 12V 2A with video transmitter switch, plus 5V 2.5A.12V output includes a video transmitter switch. |
|---|
| Air unit layout and cooling | Front-mounted air unit reduces interference. |
|---|
| Cooling structure | Finned airflow channels improve heat dissipation. |
|---|
| LED modes | Constant-on and dynamic LED modes.Modes are switched through the Betaflight configurator. |
|---|
| Moulded components | A full set of injection-moulded accessories replaces TPU-printed parts. |
|---|
| Structural and integrated equipment | Integrated LED board, all-aluminium-alloy supports and an integrated buzzer requiring no soldering. |
|---|
| Antenna mount and adapter cable | Video antenna tail mount allows angle adjustment; the adapter cable uses a fixed flange with M2 holes. |
|---|
| Image sensor | 1/1.3-inch image sensor. |
|---|
| Video capabilities | Maximum recording: 4K/120fps. Maximum live video transmission: 1080p/100fps.Maximum recording and live transmission settings, respectively. |
|---|
| Field of view | 155° ultrawide field of view.At 4K resolution. |
|---|
| Stabilisation | Supports onboard electronic stabilisation and offline Gyroflow stabilisation, subject to the required recording settings.For Gyroflow, disable electronic stabilisation and select wide-angle view through the goggles menu before flight. Footage recorded with electronic stabilisation enabled cannot be stabilised in Gyroflow. |
|---|
| Operating scope | For recreational use only; autonomous flight is not supported. |
|---|