iFlight GM110-8

The iFlight GM110-8 is a brushless gimbal motor for camera stabilization, UAV pods and airborne lidar pod turntables. It features a sealed case, a hollow shaft for a slipring and a 24N/28P configuration. Supplied as one motor, it has a maximum power of ≤60W.

iFlightPayloads & thermal cameras

Motor weight: 534±1g

Product overview

The iFlight GM110-8 brushless gimbal motor provides direct drive for camera stabilization and is intended for airborne pods, UAV pods and airborne lidar pod turntables. Its 24N/28P construction combines a sealed case that protects against dust and dirt contamination with a hollow shaft for a slipring. The motor measures Ф110±0.05mm in outer diameter and 26±0.2mm in height, including the encoder housing, with a weight of 534±1g. Each package contains one GM110-8 brushless gimbal motor.

Electrical connections use 610±3mm #24 cable with a 2.5mm Dupont connector. At no load, the motor specifications are 20 V, 0.09±0.1 A and 125~139 RPM; under load, they are 20V, 2A and 8000-12000 g·cm of torque. Maximum power is ≤60W, and rotor housing runout is ≤0.1mm. The working environment spans -20~60℃ and 10~90%RH. High- and low-temperature tests each specify normal operation after 100 hours at 60℃ or -20℃, respectively, followed by 24 hours at room temperature.

Mission payloads

Specifications

iFlight GM110-8 specifications
Specification	Value & conditions
Model	GM110-8
Product type and supplied quantity	1 x GM110-8 brushless gimbal motor
Applications	Airborne pods, UAV pods and airborne lidar pod turntables
Housing	Sealed case to prevent contamination by dust and dirt
Shaft design	Hollow shaft for slipring
Motor outer diameter	Ф110±0.05mm
Configuration	24N/28P
Motor height	26±0.2mmIncluding encoder housing.
Wire length	610±3mm
Cable AWG	#24
Motor weight	534±1g
Wire plug	2.5mm dupont connector
No-load current	0.09±0.1 ANo-load.
No-load voltage	20 VNo-load.
No-load speed	125~139 RPMNo-load.
Load current	2AUnder load.
Load voltage	20VUnder load.
Load torque	8000-12000 g·cmUnder load.
Motor internal resistance	20.19Ω±5%Resistance varies with temperature.
High-voltage test	DC500V 1mA @2secTest duration: 2 seconds.
Rotor housing runout	≤0.1mm
Rotation direction	ClockwiseViewed at the axle extension.
High-temperature test	Motor can work normally after the stated exposure and recovery period.After 100 hours at 60℃ followed by 24 hours at room temperature.
Low-temperature test	Motor can work normally after the stated exposure and recovery period.After 100 hours at -20℃ followed by 24 hours at room temperature.
Maximum power	≤60W
Working temperature and humidity	-20~60℃;10~90%RH