iFlight GM110-8 / GM110-10

The iFlight iPower GM110-8 / GM110-10 expansion board set provides gimbal motors and 32-bit SimpleBGC control hardware for three-axis UAV and handheld camera stabilization. Supplied with three motors, an Alexmos control set and matching wiring, it uses firmware without encoder support. Both model options exclude an aluminum housing.

iFlightPayloads & thermal cameras

Motor weight: 534±1g / 532±1g
Supply voltage: 8-26 V

Product overview

The iFlight iPower GM110-8 / GM110-10 expansion board set combines gimbal motors with Alexmos 32-bit SimpleBGC control hardware for three-axis camera stabilization. It supports UAV-mounted camera systems and handheld stabilizers. The package contains three GM110-8/10 gimbal motors, one Alexmos 32-bit SimpleBGC control set and one matching wiring set. GM110-8 and GM110-10 options pair the motors with a 32-bit control board without an aluminum housing. The set uses firmware without encoder support.

Each motor measures Φ110±0.05mm in outside diameter and 26±0.2mm in height, with 610±3mm #24 AWG leads and a 2.5mm DuPont connector. Motor operation requires 4~6S, with an operating environment of -20~60°C and 10%~90% RH. The SimpleBGC expansion board measures 50×50mm, with 45mm mounting hole spacing and 3mm mounting holes. Its supply range is 8-26V with a 3S-6S lithium battery; maximum motor current is 1.5A, and external equipment supply current is up to 1A.

Mission payloads

Specifications

iFlight GM110-8 / GM110-10 specifications
Specification	Value & conditions
Product	IFlight iPower GM110-8 / GM110-10 gimbal motor and expansion board set, without encoder firmware.
Applications	Three-axis camera stabilization systems for UAV-mounted and handheld camera stabilizers.
Model	GM110-8 / GM110-10
Motor outside diameter	Φ110±0.05mm
Motor height	26±0.2mm / 26±0.2mm
Lead length	610±3mm
Wire specification	#24 AWG
Motor weight	534±1g / 532±1gGM110-8 / GM110-10, respectively.
Connector	2.5mm DuPont connector
No-load current	0.09±0.1ANo load, at 20V.
No-load voltage	20VNo load.
No-load speed	125~139RPM / 292~323RPMGM110-8 / GM110-10, respectively; no load at 20V.
Load current	2AUnder load at 20V.
Load voltage	20VUnder load.
Load torque	8000~12000g·cm / 9000~15000g·cmGM110-8 / GM110-10, respectively; under load at 20V and 2A.
Motor internal resistance	20.19Ω±5%Resistance varies with temperature.
Dielectric withstand test	DC500V, 1mA2-second duration.
Rotor housing runout	≤0.1mm
Operating battery cell count	4~6SMotor.
Operating temperature and humidity	-20~60°C; 10%~90% RH
High-temperature test	Normal operation after the specified exposure and recovery.100 hours at 60°C, followed by 24 hours at room temperature.
Low-temperature test	Normal operation after the specified exposure and recovery.100 hours at -20°C, followed by 24 hours at room temperature.
Circuit board dimensions	50×50mmSimpleBGC 32-bit expansion board.
Mounting hole spacing	45mmSimpleBGC 32-bit expansion board.
Mounting hole diameter	3mmSimpleBGC 32-bit expansion board.
Supply voltage	8-26VSimpleBGC 32-bit expansion board; 3S-6S lithium battery.
Maximum motor current and output voltage	Maximum motor current: 1.5A; output: 5VSimpleBGC 32-bit expansion board.
External equipment supply and 3V output current	External equipment supply current: up to 1A; 3V output current: 150mASimpleBGC 32-bit expansion board.
Package contents	3 × GM110-8/10 gimbal motors; 1 × Alexmos 32-bit SimpleBGC control set; 1 × matching wiring set
Housing exclusion	Aluminum housing is not included.GM110-8 or GM110-10 with 32-bit control board.