ChinaDroneRequest a quote →

Defender 20 Lite X 2S HD - RTF

The iFlight Defender 20 Lite X 2S HD - RTF is a ready-to-fly FPV package for indoor and outdoor footage capture. It combines DJI O4 Wide Air Unit video, removable prop guards and a vibration-damping camera pod, supplied with DJI Goggles N3, a Commando 8 V2 radio, filters, a propeller removal tool and carrying case.

iFlightFPV drones
Maximum hover time
Approx. 6 min
Aircraft weight
75±3g
Video transmission
DJI O4 Wide Air Unit

Get a free quote

Product overview

The iFlight Defender 20 Lite X 2S HD - RTF is built for outdoor flying and navigating tight indoor spaces while recording immersive FPV footage. Its 87mm wheelbase carries Borg F7 AIO(RX) flight electronics, Defender 16 1103 14000KV motors and Defender 20 Lite 2020*3 propellers. Quick-release prop guards detach with four screws in 30 seconds to enable an open-prop configuration. A vibration-damping camera pod helps reduce vibration-induced jello effects, while two battery mounting methods accommodate flexible battery options.

The DJI O4 Wide Air Unit combines a 1/2-inch CMOS sensor with a 159° field of view and recording up to 4K/60fps. Maximum speed is 75km/h in Manual Mode, and maximum hover time is approximately six minutes with a 2S 520mAh battery. The aircraft operates from -10° to 40° C and does not support autonomous flight. Supplied equipment includes the aircraft, DJI Goggles N3, a dark-gray Commando 8 V2 radio, a filter set, a propeller removal tool and a Defender carrying case.

Specifications

SpecificationValue & conditions
ProductIFlight Defender 20 Lite X 2S HD - RTF ready-to-fly FPV package
Flight electronicsBorg F7 AIO(RX)
Video transmissionDJI O4 Wide Air Unit
Frame wheelbase87mm
MotorsDefender 16 1103 14000KV motors
PropellersDefender 20 Lite 2020*3 props
Aircraft weight75±3g
Aircraft dimensions (L×W×H)137*125*47mm
Maximum speed75km/hManual Mode.
Maximum takeoff altitude2000 m
Maximum hover timeApprox. 6 minWith 2S 520mAh battery.
Aircraft operating temperature-10° to 40° C
Camera sensor and optics1/2-inch CMOS Sensor; FOV: 159°; format equivalent: 16 mm; aperture: f/2.8; focus: 1 m to ∞
Camera ISO range100-6400 (Auto)/100-12800 (Manual)Auto and Manual modes, respectively.
Video recording resolutions
  • 4K (4:3): 3840×2880@30/50/60fps;
  • 4K (16:9): 3840×2160@30/50/60fps;
  • 1080p (4:3): 1440×1080@30/50/60/100/120fps;
  • 1080p (16:9): 1920×1080@30/50/60/100/120fps
4:3 and 16:9 aspect ratios as indicated.
Video format and maximum bitrateMP4; 100 Mbps
Electronic image stabilizationRockSteady 3.0+; stabilization function off supports GyroflowGyroflow support with stabilization function off.
Radio model and colorCommando 8 ELRS V2 Radio; dark gray
Radio weight and dimensionsWeight: 310g (±10g); dimensions: L 190 x W 150 x H 51mm
Radio communication frequency5.725-5.850 GHz
Radio transmission power (EIRP)
  • 2.4GHz: FCC: 27 dBm;
  • CE: less than 14 dBm;
  • SRRC: less than 19 dBm. 900MHz: FCC: 30 dBm;
  • CE: less than 14 dBm;
  • SRRC: less than 19 dBm
2.4GHz and 900MHz bands; FCC, CE and SRRC qualifications as indicated.
Radio operating current0.6 A @ 7.6 VAt 7.6 V.
Radio operating timeApprox. 8 hours
Radio temperature rangesOperating: 0°C to 40°C (32°F to 104°F); charging: 5°C to 40°C (41°F to 104°F)Operating and charging ranges, respectively.
Goggles model and weightDJI Goggles N3; approx. 536 g (battery included)Battery included in weight.
Supplied equipment1 x Defender 20 Lite O4 HD BNF; 1 x DJI Goggles N3; 1 x Commando 8 V2; 1 x Filter Set; 1 x Propeller Removal Tool; 1 x Defender Carrying Case
Removable prop guardsQuick-release prop guards detach with four screws in 30 seconds for switching to an open-prop formFour screws; 30 seconds for prop-guard removal.
Camera mountingVibration-damping camera pod designed to minimize vibration-induced jello effects
Battery mountingTwo battery mounting methods and flexible battery options
Intended use and flight limitationIndoor and outdoor FPV footage capture

Related guides